酸化杀菌技术研究及在注水井中应用

doi:10.3969/j.issn.1006-396X.2012.03.011

石油化工高等学校学报 ›› 2012, Vol. 25 ›› Issue (3): 52-56.DOI: 10.3969/j.issn.1006-396X.2012.03.011

酸化杀菌技术研究及在注水井中应用

张磊¹,赵凤兰^1* ,斯文²,姜康¹,丁观世¹

(1.中国石油大学(北京),北京102249;2.中原油田采油四厂,河南濮阳457001)

收稿日期:2012-04-06 修回日期:1900-01-01 出版日期:2012-06-25 发布日期:2012-06-25
作者简介:张磊（１９８７－），男，湖北洪湖市，在读硕士
基金资助:
国家科技重大专项（２００９ＺＸ０５００９

The Research and Application of Acidification and  Sterilization Technology in Water Injection Well

1.China University of Petroleum(Beijing), Beijing 102249, P.R.China; 2.The Fourth Ｏil Mining Factory of Zhong　Yuan Oilfield, Puyang Henan 457001, P.R.China

Received:2012-04-06 Revised:1900-01-01 Published:2012-06-25 Online:2012-06-25

摘要/Abstract

摘要： 从油藏物性着手，结合化验手段分析出地层渗透率下降是由于水质变化和细菌污染所引起，需要对油层进行酸化、杀菌以解堵增注。酸化液体系主要包括预处理液、前置液、氧化杀菌液、主体酸、后置酸，在确定酸化液体系后，开展了酸化液性能评价的室内实验，实验包括４个方面的内容：酸化液的腐蚀性、杀菌性、防二次伤害及穿透性，实验结果表明该酸化液体系能满足文８７区块的酸化增注要求。以室内实验为依据开展现场应用，文８７－８井在施工前注入压力为３６ＭＰａ、日注入量为３３ｍ３，施工后注入压力为２１ＭＰａ、日注入量为７０ｍ３，酸化液的各组分体积为：预处理液４ｍ３、前置液８ｍ３、氧化杀菌液５ｍ３、主体酸１５ｍ３、后置酸４ｍ３、顶替液１２ｍ３，矿场实践表明该酸化液体系能满足文８７区块的酸化增注要求。

关键词: 酸化 , 杀菌 , 缓速 , 二次伤害

Abstract: On the base of reservoir properties, and combined with chemical analysis, this paper revealed that formation permeability reduction was due to changes in injection water quality and the pollution of formation caused by bacteria. It was necessary to take acidification, sterilization on the reservoir to increase the injection water volume. The system of acidification fluid mainly included pretreating solution system, preflush, oxidation sterilization liquid, body acid, rear acid, in the setting of acidizing fluid system, the evaluation of acidizing fluid performance was carried out by laboratory experiments. The experiment included four aspects of acidizing fluid: corrosivity, bactericidal properties, preventing the secondary damage and penetrability. The experimental results show that the acidizing fluid system can meet the requirement of Wen 87 block acid stimulation. The field application was carried out, based on laboratory experiments. Injection pressure of W87-8 well was 36 MPa and injection volume was 33 m³ before the construction. And after the construction, injection pressure was 21 MPa and injection volume was 70 m³. The dosage of each component in acidification fluid as follow: pretreatment liquid was 4 m³, pad fluid was 8m³, oxidation and disinfection liquid was 5 m³, subject acid was 15 m³, after-pad acid was 4 m³, displacement fluid was 12 m³. The results of practice indicated that the acid has a very good stimulation effect.

Key words: Acidification, Sterilization, Retardation, The secondary damage

张磊,赵凤兰,斯文,姜康,丁观世. 酸化杀菌技术研究及在注水井中应用[J]. 石油化工高等学校学报, 2012, 25(3): 52-56.

ZHANG Lei,ZHAO Feng-lan,SI Wen,et al. The Research and Application of Acidification and  Sterilization Technology in Water Injection Well[J]. Journal of Petrochemical Universities, 2012, 25(3): 52-56.

[1]	吕家兴，侯磊，刘芳媛，朱振宇，王玉江. 埕岛油田高质量浓度返排液量控制指标研究[J]. 石油化工高等学校学报, 2021, 34(1): 34-38.
[2]	刘陆，陈立，李艳武，黄亮亮. 金属⁃草酸化合物作为质子传导材料的研究进展[J]. 石油化工高等学校学报, 2020, 33(6): 1-7.
[3]	张继伟, 王春林, 荣新明. 曹妃甸11⁃2油田高含水水平井酸化研究与应用[J]. 石油化工高等学校学报, 2018, 31(6): 95-100.
[4]	曹广胜,李世宁,马骁,李泽,杨晓雨,何奇. 酸化返排液电脱水效果影响因素分析[J]. 石油化工高等学校学报, 2018, 31(01): 57-60.
[5]	崔福员,桑军元,杨彬,李文杰,李军,王云云,谷庆江. 高温酸液胶凝剂的合成及性能评价[J]. 石油化工高等学校学报, 2017, 30(1): 31-35.
[6]	张继红, 刘天啸, 王瑜. 曝氧和杀菌对含聚污水稀释聚合物溶液黏度的影响[J]. 石油化工高等学校学报, 2015, 28(5): 36-40.
[7]	徐凌, 兰夕堂, 刘建忠, 贾云林, 高建崇. 两种新型高温除垢剂的性能评价[J]. 石油化工高等学校学报, 2014, 27(6): 29-32.
[8]	曲占庆, 黄德胜, 宋更军, 曲冠政, 龚迪光. 商三区块注水井堵塞机理研究[J]. 石油化工高等学校学报, 2013, 26(6): 41-46.
[9]	蒋文学,李永明,齐亚民,李勇. 多元解堵技术在白于山区块的研究与应用[J]. 石油化工高等学校学报, 2011, 24(6): 27-30.
[10]	杨永飞, 姚军, 赵修太, 赵晓珂. 酸化缓蚀剂对N80钢在盐酸溶液中的缓蚀性能[J]. 石油化工高等学校学报, 2009, 22(2): 26-29.
[11]	贾江鸿, 赵修太, 程远方, 邱广敏, 董志国. 高温酸化胶凝剂YJN-1的合成及影响因素考察[J]. 石油化工高等学校学报, 2007, 20(4): 5-9.

酸化杀菌技术研究及在注水井中应用

The Research and Application of Acidification and  Sterilization Technology in Water Injection Well

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 11

编辑推荐

Metrics