双主密封特殊螺纹油管接头密封性能研究

doi:10.3969/j.issn.1006-396X.2019.03.010

石油化工高等学校学报 ›› 2019, Vol. 32 ›› Issue (3): 58-64.DOI: 10.3969/j.issn.1006-396X.2019.03.010

双主密封特殊螺纹油管接头密封性能研究

王磊¹，付强¹，李越¹，张成君¹，莫丽²，涂炼²

（1. 中海油田服务股份有限公司，天津 300459； 2. 西南石油大学，四川成都 610500）

收稿日期:2018-03-02 修回日期:2018-05-07 出版日期:2019-06-06 发布日期:2019-06-18
作者简介:王磊(1989-)，男，硕士，工程师，从事海上石油完井工具设计方面研究；E-mail：wanglei130@cosl.com.cn
基金资助:
中海油田服务股份有限公司科研攻关项目（E?23177002）

Study on Sealing Performance of Double Main Seal Special Thread Tubing Joints

Wang Lei¹，Fu Qiang¹，Li Yue¹，Zhang Chengjun¹，Mo Li²，Tu Lian²

(1. China Oilfield Services Limited，Tianjin 300459，China； 2. Southwest Petroleum University，Chengdu Sichuan 610500，China）

Received:2018-03-02 Revised:2018-05-07 Published:2019-06-06 Online:2019-06-18

摘要/Abstract

摘要： 针对超深油气井中对密封性能的严格要求，基于特殊螺纹密封机理，设计一种由锥面对锥面和柱面对球面组成的双主密封特殊螺纹接头结构。采用数值模拟方法分析接头在拉伸、压缩、拉伸和内压、拉伸和内外压4种工况下，双主密封面接触应力、接触长度的变化情况，并对螺纹接头在极限载荷下的密封性能进行研究，得到接头密封能力随不同载荷的变化规律。最后对接头试样进行全尺寸试验，结果表明该双主密封特殊螺纹接头的密封性能满足使用要求。

关键词: 特殊螺纹, 接触应力, 密封性能, 密封结构, 全尺寸试验

Abstract: Aiming at the demanding requirements of sealing performance in ultra⁃deep oil and gas wells, a double main sealing structure consisting of conical surface to conical surface and cylindrical surface to spherical surface was designed based on the special thread sealing mechanism. Using numerical simulation method, the changes of contact stress and the contact length of the sealing surface under the four conditions of tensile, compression, tension and internal pressure, tension and internal and external pressures were analyzed. The sealing performance of threaded joints under the ultimate load was studied, and the change rule of sealing capacity with different loads was obtained. The full⁃scale test results show that the sealing performance of the double main seal premium threaded joint meets the application requirements.

Key words: Premium threaded, Contact stress, Sealing structure, Sealing performance, Full?scale test

王磊，付强，李越，张成君，莫丽，涂炼. 双主密封特殊螺纹油管接头密封性能研究[J]. 石油化工高等学校学报, 2019, 32(3): 58-64.

Wang Lei，Fu Qiang，Li Yue，Zhang Chengjun，Mo Li，Tu Lian. Study on Sealing Performance of Double Main Seal Special Thread Tubing Joints[J]. Journal of Petrochemical Universities, 2019, 32(3): 58-64.

[1]	丁雪兴, 王竞墨, 王世鹏, 杨小成, 严如奇. 机械密封影响因素分析及展望[J]. 石油化工高等学校学报, 2021, 34(6): 89-96.
[2]	程香平,孟祥铠,彭旭东,张友亮,康林萍. 倾斜菱形孔端面密封的性能研究[J]. 石油化工高等学校学报, 2016, 29(2): 76-81.
[3]	陈松,刘金纯,杨宇峰,景鹏飞,谢禹钧. 加氢反应器非标八角垫密封性能有限元分析[J]. 石油化工高等学校学报, 2016, 29(1): 72-75.
[4]	周到, 田旭东, 钟瑜, 王磊. 空气源热泵热水机组压缩机密封结构设计[J]. 石油化工高等学校学报, 2009, 22(2): 52-55.

双主密封特殊螺纹油管接头密封性能研究

Study on Sealing Performance of Double Main Seal Special Thread Tubing Joints

HTML

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics