石蜡加氢精制催化剂FV-30的研制及工艺条件的研究

doi:10.3969/j.issn.1006-396X.2012.01.009

石油化工高等学校学报 ›› 2012, Vol. 25 ›› Issue (1): 41-45.DOI: 10.3969/j.issn.1006-396X.2012.01.009

石蜡加氢精制催化剂FV-30的研制及工艺条件的研究

张艳侠,袁胜华,袁平飞,张皓,高鹏,付秋红

中国石油化工股份有限公司抚顺石油化工研究院

收稿日期:2011-12-20 修回日期:1900-01-01 出版日期:2012-02-25 发布日期:2012-02-25
作者简介:张艳侠（１９７４－），女，吉林德惠市，工程师，硕士

Development of New Ball Shape Petroleum Wax Hydrofining  Catalyst and Process Condition

Fushun Research Institute of Petroleum and Petrochemicals，SINOPEC, Fushun Liaoning 113001, P.R.China

Received:2011-12-20 Revised:1900-01-01 Published:2012-02-25 Online:2012-02-25

摘要/Abstract

摘要： 对新型石油蜡类加氢精制催化剂的制备、工艺条件及原料适应性进行了研究。结果表明，ＦＶ－３０催化剂具有良好的物理化学性质，呈五齿球形，强度高，粒度小，适合石油蜡料的加氢反应特点和要求，并具有优良的活性及好的原料适应性。在堆积密度较ＦＶ－１０催化剂低２０％的条件下，催化剂的活性达到ＦＶ－１０的水平。

关键词: 石油蜡 , 加氢精制 , 球形催化剂 , 研制

Abstract: The development of new ball shape petroleum wax hydrofining catalyst and process condition as well as experiments on various feedstocks were described. The experiment results show that the catalyst has excellent physical chemistry nature and with five-teeth ball physical form, high strength, small granularity. Meetging petroleum wax hydrofining characteristics and with excellent activity and good adaptability on wax material. Under the 20％ low density comparing FV-10 catalyst, the activity is comparable.

Key words: Petroleum wax, Hydrofining, Ball shape catalyst, Development

张艳侠,袁胜华,袁平飞,张皓. 石蜡加氢精制催化剂FV-30的研制及工艺条件的研究[J]. 石油化工高等学校学报, 2012, 25(1): 41-45.

ZHANG Yan-xia, YUAN Sheng-hua, YUAN Ping-fei, et al. Development of New Ball Shape Petroleum Wax Hydrofining  Catalyst and Process Condition[J]. Journal of Petrochemical Universities, 2012, 25(1): 41-45.

石蜡加氢精制催化剂FV-30的研制及工艺条件的研究

Development of New Ball Shape Petroleum Wax Hydrofining  Catalyst and Process Condition

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics