Deformation Identifying of the Horizontal-Type Elliptic Cylindrical Oil  Tank and Tank Capacity Calibration Model

doi:10.3696/j.issn.1006-396X.2011.06.023

Journal of Petrochemical Universities ›› 2011, Vol. 24 ›› Issue (6): 93-96.DOI: 10.3696/j.issn.1006-396X.2011.06.023

1.Department of Computer Science, Yan’an University, Yan’an Shaanxi 716000,P.R.China; 2. Software Research and Development Center, Yan’an University, Yan’an Shaanxi 716000,P.R.China; 3.State Key Laboratory of Information Security, Institute of Software, The Chinese Academy of Sciences, Beijing 100080,P.R.China

Received:2011-09-06 Published:2011-12-25 Online:2011-12-25

卧式椭圆柱型储油罐的变位识别与罐容标定

王文发^1,2,马燕^1,2,田云娜^1,2,李红达³

1.延安大学计算机学院;2.延安大学软件研究与开发中心;3.中国科学院软件研究所信息安全国家重点实验室

作者简介:王文发（１９６８－），男，陕西志丹市，副教授，硕士
基金资助:
国家自然科学基金资助项目(60970139)

Abstract

Abstract: In order to solve the error problems of tank capacity measurement caused by oil tank deformation, the after tank oil of horizontal-type elliptic cylindrical oil were recalibrated. The corresponding calibration model are established and tank capacity calibration formula are also built when oil tank in horizontal and inclined position. Meanwhile, model solution steps are given.The model are tested through the examples, the test results have confirmed the correctness and the feasibility of the model.

Key words: Deformation, Identification, Tank capacity, Calibration, Model

摘要： 为了解决由于储油罐变位而导致的罐容表计量误差问题，对卧式椭圆柱型储油罐变位后罐内油量进
行了重新标定，建立了相应的标定模型和储油罐在水平和倾斜放置时的罐容标定公式，并给出了模型的求解步骤。
通过实例对模型进行检验，检验结果验证了模型的正确性和可行性。

关键词: 变位 , 识别 , 罐容 , 标定 , 模型

WANG Wen-fa,MA Yan,TIAN Yun-na,et al.

Deformation Identifying of the Horizontal-Type Elliptic Cylindrical Oil Tank and Tank Capacity Calibration Model

[J]. Journal of Petrochemical Universities, 2011, 24(6): 93-96.

王文发,马燕,田云娜,李红达. 卧式椭圆柱型储油罐的变位识别与罐容标定[J]. 石油化工高等学校学报, 2011, 24(6): 93-96.

0
/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: https://journal.lnpu.edu.cn/syhg/EN/10.3696/j.issn.1006-396X.2011.06.023

https://journal.lnpu.edu.cn/syhg/EN/Y2011/V24/I6/93

[1]	Gongxing LI. Research on Leakage Monitoring and Identification of Buried Pipeline for Finished Oil Products [J]. Journal of Petrochemical Universities, 2025, 38(2): 48-53.
[2]	Li Chenglong. Study on Fine Identification Method of Flooding Channeling Channel in Low Permeability Fractured Reservoir [J]. Journal of Petrochemical Universities, 2021, 34(3): 38-44.
[3]	Li Wei，Meng Fanhai，Ling Xin，Li Siqi，Chen Zihe. Experimental Simulation and Fracture Characteristics Analysis of Rock under Uniaxial Compression Based on Discrete Element Method [J]. Journal of Petrochemical Universities, 2019, 32(4): 33-38.
[4]	Li Zhanfeng, Yang Suo, Li Hongying, Xie Ting, Zhang Zhannü. Study on Correction Method of Moisture Rate and Displacement Multiple Curve [J]. Journal of Petrochemical Universities, 2018, 31(6): 41-45.
[5]	Meng Wangcai,Hu Chunqiao,Deng Nantao. Four Character' Relations on Chang 6 Reservoir in Shangzhenzi Area, Erdos Basin [J]. Journal of Petrochemical Universities, 2018, 31(03): 68-75.
[6]	He Guoxi,Liang Yongtu,Li Yansong，et al. An Interface Detection Device for Mixed Oil Based on Conductivity [J]. Journal of Petrochemical Universities, 2017, 30(3): 61-65.
[7]	Ding Xuexing,Wang Wending,Jin Haijun,Zhao Haihong. A Numerical Simulation Study of Frictional Characteristics of Seal Faces on the Starting and Stopping Process of a Dry Gas Seal [J]. , 2017, 30(2): 91-96.
[8]	Lin Fei, Li Chunying,Xu Mo. Optimization and Performance Evaluation of Plugging System  in Low Permeability Fractured Reservoir [J]. Journal of Petrochemical Universities, 2015, 28(6): 34-38.
[9]	PENG Chong,XUE Jinzhao,ZENG Ronghui,et al. Process and Macro Kinetic Model of VGO Hydrodesulfurization [J]. Journal of Petrochemical Universities, 2013, 26(6): 12-15.
[10]	CHEN Li, ZHU Xiangzhe, SHI Chengjiang. Random Collision Response between Tube and Baffle Under  the Effect of FlowInduced Vibration [J]. Journal of Petrochemical Universities, 2013, 26(6): 74-77.
[11]	FAN Kaifeng,WANG Weiqiang, A Sihan,SHI Haitao, CHENG Tao. The Numerical Simulation Study of TwoPhase  OilWater Flow in Horizontal TTube [J]. Journal of Petrochemical Universities, 2013, 26(5): 75-77.
[12]	LIU Jie, LI Wenshen, LI Wei,et al. The Experimental Calibration on Theoretical Plate Number of Furfural Extraction Column [J]. Journal of Petrochemical Universities, 2013, 26(2): 17-20.
[13]	HUANG Wei,CONG Yu-feng,GUO Da-peng. Catalytic Oxidized Reaction of Paraffin Wax Based on BP Neural Network [J]. Journal of Petrochemical Universities, 2012, 25(6): 30-33.
[14]	ZHANG Xiao-tong, LIANG Jun-hu, REN Chuang, et al. Release Kinetic Model Studies of Functionalized Mesoporous Materials SBA-15 as Aspirin Carriers [J]. Journal of Petrochemical Universities, 2012, 25(2): 1-4.
[15]	JIA Feng-rui,LIU Lu,WANG Chun-hua,et al. Analysis of Sinter Mixture’s Drying process [J]. Journal of Petrochemical Universities, 2012, 25(1): 76-80.