Prepration of Emulsified Polishing Wax fo r Leather Goods

Journal of Liaoning Petrochemical University ›› 2005, Vol. 25 ›› Issue (2): 9-12.

Previous Articles Next Articles

Prepration of Emulsified Polishing Wax fo r Leather Goods

1.School of Petrochemical Technology , Liaoning University of Petroleum & Chemical Technology ,Fushun Liaoning 113001 , P .R .China ;
2 .Institute of Petrochemical No.1 Factory of Fushun Petrochemical Company , Fushun Liaoning 113001 , P .R .China

Received:2004-09-21 Published:2005-06-20 Online:2017-04-18

皮革上光乳化蜡的研制

陈　平¹ , 权成光²

1.辽宁石油化工大学石油化工学院, 辽宁抚顺113001;
2.抚顺石化公司石化一厂研究所, 辽宁抚顺113001

作者简介:陈平(1963 -), 女, 辽宁抚顺市, 副教授, 硕士。

Abstract

Abstract:

　The artificial beeswax was prepared from paraffin wax and microcrystalline by chemical modification .I ts quality and function is similar to that of natural beeswax .By using artificial beeswax as starting material and water as diluting agent , polishing wax for leather gooes was prepared .The product' s feature is well -distributed sheet , well function and low cost.The effects on stability of emulsifying w ax such as emulsifier type , quantity , stirring speed , emulsifying time and emulsifying temperature were discussed .The results show that the mixed emulsifier comprises two kinds of no nionic surfactants and auxiliary additives .The sphere particle of emulsion is well distributed and very stable w hen the mass ratio of emulsifiers and oil phase exceed 0 .30.Microemulsion is formed w hen the mass ratio of emulsifiers and oil phase exceed 0 .40.The best emulsifying process conditions are :emulsifying time is 10 ～ 30 minutes, stir ring speed is 700 ～ 1 400 r/ min and emulsifying temperature is 85 ～ 95 ℃.The emulsified wax obtained as above has better stability .

null

Key words: 　Leather , Polishing , Modification, Artificial beesw ax , Emulsifying process

摘要： 　采用石蜡与微晶蜡为原料, 经化学改性研制出人造蜂蜡, 其质量和性能与天然蜂蜡基本相同。以人造蜂蜡为原料, 水为稀释剂研制出的皮革上光乳化蜡产品涂层均匀、性能优异、成本较低。探讨了乳化剂的种类、用量, 制备乳化蜡的搅拌速度、乳化时间、温度等因素对乳化蜡稳定性的影响。结果表明, 乳化剂以两种非离子型表面活性剂为主, 同时加入助乳化剂, 形成复合乳化剂。当总乳化剂与油相质量比为0 .30 以上时, 乳液呈均匀球状颗粒,稳定性较好;两者质量比为0 .40 以上时, 可形成微乳液。确定了最佳乳化工艺条件为:乳化时间为10 ～ 30 min, 搅拌速度为700～ 1 400 r/ min , 乳化温度为85～ 95 ℃。得到的乳化蜡稳定性较好。

关键词: 皮革, 　上光, 　改性, 　人造蜂蜡, 　乳化工艺

CHEN Ping,QUAN Cheng -guang. Prepration of Emulsified Polishing Wax fo r Leather Goods[J]. Journal of Liaoning Petrochemical University, 2005, 25(2): 9-12.

陈　平, 权成光. 皮革上光乳化蜡的研制[J]. 辽宁石油化工大学学报, 2005, 25(2): 9-12.

[1]	Jing LI, Zibo LIN, Fanyu MENG, Shengjing HUANG, Fuyun LI. Effect of Microalgae Bio⁃Oil on the Properties of Rubber/SBS Modified Asphalt [J]. Journal of Liaoning Petrochemical University, 2024, 44(4): 18-24.
[2]	Yuluan Zhang, Can Guo, Luanhua Zhou, Xiaoman Yao, Yiwen Yang, Huifen Zhuang, Yirong Wang, Yifa Chen, Shunli Li, Yaqian Lan. Applications of Covalent Organic Frameworks in Li⁃S Battery Separators [J]. Journal of Liaoning Petrochemical University, 2023, 43(4): 19-29.
[3]	Yushi Wei, Rui Wang, Zhuang Lin, Heng Jiang, Mingren Huo, Xinyue Chen, Xiaoyan Liang, Chongyang Zhang. Facile Fabrication of Fe₃O₄⁃Based β⁃Cyclodextrin Polymers and Its Adsorption Performances [J]. Journal of Liaoning Petrochemical University, 2022, 42(6): 28-35.
[4]	Yongxin Fei, Huiqiang Ma, Shuang Li. Study on Adsorption Performance of Modified Activated Sludge Biochar for Phenol in Water [J]. Journal of Liaoning Petrochemical University, 2022, 42(3): 19-24.
[5]	Siqi Tong, Weiwei Jian, Qiuyan Hai, Weixin Xie, Yi Sun. Research Progress of Porous Solid Materials for CO₂ Adsorption and Removal [J]. Journal of Liaoning Petrochemical University, 2022, 42(2): 30-37.
[6]	Yonghui Zhang, Xuebing Chen, Jing Zhang. Research Progress on Modification of Bismuth Oxide as Visible Light Photocatalyst [J]. Journal of Liaoning Petrochemical University, 2021, 41(6): 1-8.
[7]	Luxi Gao, Lü Xuechuan, Hanlin Song, Chi Zhang, Tianhao Wang, Xiaohan Gao. Synthesis and Decolorization Performance of Modified Dicyandiamide⁃Formaldehyde Decolorant [J]. Journal of Liaoning Petrochemical University, 2021, 41(5): 23-27.
[8]	Cheng Jianqiang， Wang Wenguang， Han Jie. Research Progress on Mechanical Properties of Carbon Fiber Reinforced Cement⁃Based Composites [J]. Journal of Liaoning Petrochemical University, 2021, 41(3): 33-42.
[9]	Meng Wenyuan， Li Lihua， Wu Xian， Yang Ying， Ma Cheng. Preparation and Characterization of a Novel Hydrophobic Modified Cationic Polyacrylamide [J]. Journal of Liaoning Petrochemical University, 2021, 41(3): 43-47.
[10]	Zhang Li, Zhao Xuebo. Research Progress in Surface and Interface Control of Silicon⁃Based Anode Materials for Lithium Ion Batteries [J]. Journal of Liaoning Petrochemical University, 2020, 40(4): 49-58.
[11]	Sun Cai， Gao Ying， Zhang Jing. Recent Advancement of Iron Oxide Photoelectrocatalytic Materials [J]. Journal of Liaoning Petrochemical University, 2020, 40(2): 30-37.
[12]	Liang Jiling，Wang Liqun，Liu Lijuan，Tian Li，Zhang Lunqiu，Wang Weiqiang. The Modification of Fe3O4@SiO2 by Silane Coupling Agent and Performance [J]. Journal of Liaoning Petrochemical University, 2019, 39(6): 21-26.
[13]	Chen Luchan，Xiao Yan，Fu Chuanyu，Hu Yuexin，Han Xiangyan. Properties of Indonesian Oil Sand Tailings/Polyethylene Composites [J]. Journal of Liaoning Petrochemical University, 2019, 39(5): 40-44.
[14]	Lin Meixia，Li Fayun，Wang Yanjie，Xing Yang，Li Jiayu . Photocatalytic Degradation of Organic Pollutants by Modified Graphite Phase Carbonitride [J]. Journal of Liaoning Petrochemical University, 2019, 39(2): 1-09.
[15]	Li Qiang，Li Qing，Lü Yang，Wang Huan，Qin Yucai，Song Lijuan，Hu Shaozheng. Theoretical Study of Alkali Metal Modified g-C₃N₄ and Its Influence on Nitrogen Adsorption [J]. Journal of Liaoning Petrochemical University, 2018, 38(06): 37-42.

Prepration of Emulsified Polishing Wax fo r Leather Goods

皮革上光乳化蜡的研制

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics