Ansys Analysis of Rubber O-Sealing Ring

Journal of Liaoning Petrochemical University ›› 2008, Vol. 28 ›› Issue (4): 48-50.

Previous Articles Next Articles

Ansys Analysis of Rubber O-Sealing Ring

WANG Jie, XIE Yu-jun*

School of Mechanical Engineering, Liaoning University of Petroleum & Chemical Technology, Fushun Liaoning 113001, P.R.China

Received:2008-05-19 Published:2008-12-20 Online:2017-07-25

关于橡胶O形密封圈的Ansys分析

王杰，谢禹钧*

辽宁石油化工大学机械学院，辽宁抚顺 113001)

Abstract

Abstract: By utilizing finite element analysis software ANSYS, a finite element model for rubber O-sealing ring and its boundry was set up.The change of shape and stress distribution under different oil pressure and initial compressibility was analyzed, and the relations between maximum contact stress, oil pressure and initial compressibility was deduced. Then the position of possible crack was described , which is a theoretical basis for reasonable installation and use.

Key words: O-sealing ring, Ansys, Contact pressure, Finite element

摘要： 利用有限元分析软件ANSYS，建立了橡胶O形圈及其边界的有限元模型，分析了不同油压和初始压缩率下形状的变化和应力的分布，以及最大接触压力和油压、初始压缩率的关系，描述了O形圈可能出现裂纹的位置，为合理地安装和使用提供了理论依据。

关键词: O形密封圈, Ansys, 接触压力, 有限元

WANG Jie, XIE Yu-jun. Ansys Analysis of Rubber O-Sealing Ring[J]. Journal of Liaoning Petrochemical University, 2008, 28(4): 48-50.

王杰，谢禹钧. 关于橡胶O形密封圈的Ansys分析[J]. 辽宁石油化工大学学报, 2008, 28(4): 48-50.

[1]	Chengbin Wang, Yili Duo, Tie Sun, Songyu Yang. High Temperature Bolted Flange Connection Structure and Risk Analysis [J]. Journal of Liaoning Petrochemical University, 2022, 42(2): 67-72.
[2]	Zheng Zhonggang， Zhang Deqi， Deng Junyu， Wang Zijun. Layout and Control of the Stable Device on Large Opening Hanging Scaffold [J]. Journal of Liaoning Petrochemical University, 2019, 39(3): 74-79.
[3]	LiuRui, ZhaoLing, WuMing, LiuGuangxin, SongBoqiang, GaoZiqiao. Stress Analysis oft he Across Urban Gas PE Pipeline with Fixed Pier Based on the Finite Element Analysis [J]. Journal of Liaoning Petrochemical University, 2017, 37(1): 24-29.
[4]	Liu Siyu, Zhang Yingying, Gao Lei, Zhou Chenlin. Thermal Stress Analysis and Safe Assessment of the Fin-Tube [J]. Journal of Liaoning Petrochemical University, 2016, 36(6): 55-59.
[5]	Wang Tianshu， Jia Min， Zhu Xiangzhe. Finite Element Analysis and Stress Evaluation of the Manhole Area in a Hydrogenation Reactor [J]. Journal of Liaoning Petrochemical University, 2016, 36(2): 40-44.
[6]	Zhan Jiedong， Ren Meng， Guan Haiwei， Zhao Dewang. Study on the Mechanical Behaviors of the Hollow Reinforced Concrete Column Confined by GFRP Tube [J]. Journal of Liaoning Petrochemical University, 2015, 35(5): 49-53.
[7]	NIU Ke, DENG Zilong, WANG Yue,XU Long. Analysis of the Performance of the Small Hydraulic Excavator Boom [J]. Journal of Liaoning Petrochemical University, 2013, 33(3): 64-66.
[8]	GONG Xue, XIE Yujun. alculation of Stress Intensity Factors for Circumferential Cracks in the Quick Opening Closure [J]. Journal of Liaoning Petrochemical University, 2013, 33(1): 82-85.
[9]	GONG Xue， XIE Yu-jun, LIU Fu-min. Calculation of Stress Intensity Factor for Fast-Opening Blind [J]. Journal of Liaoning Petrochemical University, 2012, 32(4): 80-82.
[10]	LIN Guo-qing，WANG Mao-ting，LIN Meng. Reliability Analysis of Automobile Engine Connecting Rod Working in Tension and Compression Conditions [J]. Journal of Liaoning Petrochemical University, 2011, 31(3): 50-53.
[11]	WANG Jian, XIE Yu-jun. The Computing Method of I-Mode Stress-Intensity Factor of Rigid Square-Ended Punch Using J-Integral [J]. Journal of Liaoning Petrochemical University, 2008, 28(1): 34-36.
[12]	LI Ping, QIU Di -fan, ZHAO Ying -jie. Finite Element Analysis in Pressure Loss of Sprinkler Passage Based on ANSYS / FLOTRAN [J]. Journal of Liaoning Petrochemical University, 2007, 27(4): 48-50.
[13]	ZHAO Bin. Finite Element Modal Analysis for PACKER Inner Pull Rod [J]. Journal of Liaoning Petrochemical University, 2007, 27(1): 50-52.
[14]	ZHU Xiang -zhe,LIN Wei. Finite Element Analysis of Quality Factor Influencing Sheet Drawing [J]. Journal of Liaoning Petrochemical University, 2005, 25(2): 46-49.

Ansys Analysis of Rubber O-Sealing Ring

关于橡胶O形密封圈的Ansys分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 14

Recommended Articles

Metrics