Perfo rmance Comparison Between Helical and Segmental Baff le Board Heat Exchangers and Optimization of Helix Angle

Journal of Liaoning Petrochemical University ›› 2005, Vol. 25 ›› Issue (2): 59-62.

Previous Articles Next Articles

Perfo rmance Comparison Between Helical and Segmental Baff le Board Heat Exchangers and Optimization of Helix Angle

School of Mechanical Engineering , Liaoning University of Petroleum & Chemical Technology ,
Fushun Liaoning 113001 , P .R .China

Received:2004-09-30 Published:2005-06-20 Online:2017-04-18

螺旋与弓形折流板换热器性能对比及螺旋角优化

杨　军, 陈保东^＊ , 孙成家

辽宁石油化工大学机械学院, 辽宁抚顺113001

作者简介:杨军(1977 -), 男, 辽宁抚顺市, 在读硕士。

Abstract

Abstract:

　Performance test of heat transfer and pressure drop was done in the helical baffle heat exchangers with helix angle of 12°,18°, 30°and 40°.Applying a software Tasc3 o f British Heat Transfer Association, the operation situation of heat exchangers of segmental baffle board was simulated , and the value of heat coefficient and pressure drop was obtained.Through data computation, under the same flow quantity , the overall coefficient per pressure drop of helical baffle board heat exchangers with different helix angles was compared with those of segmental baffle board heat exchangers.Meanwhile , the coefficient at shell side and the pressure drop were studied contrastively for different helix angles of 12°, 18°, 30°and 40°, and helix angle w as optimized .The results show that the overall heat coefficient of helical baffle board heat ex changers in our tests is higher 59.48% than that of segmental baffle board heat ex changers of corresponding structures.Under the test condition, the general performance of baffle heat exchanger with helix angle of 18? is better than baffle heat exchanger with helix angle 12°, 30°and 40°.

Key words: 　Helix angles , Helical baffle board , Segmental baffle board, Coefficient of heat transfer , Heat exchanger

摘要： 对螺旋角为12 、18 、30 、40°的螺旋折流板换热器进行传热和压降性能测试。应用英国传热协会的Tasc3 软件对弓形折流板换热器的运行情况进行了模拟, 得到了相应结构下的总传热系数和压降值。通过数据的计算整理, 在相同流量下, 进行了不同螺旋角的螺旋折流板换热器与弓形折流板换热器在单位压力降下总传热系数的对比, 同时对12、18 、30、40°螺旋角的螺旋折流板换热器的壳程膜传热系数及压降进行对比研究, 优化螺旋角。实验结果表明, 实验用12、18 、30、40°螺旋角的螺旋折流板换热器的总传热系数要比相应结构下的弓形折流板换热器高59 .48 %以上, 研究表明, 实验条件下, 18°螺旋角的螺旋折流板换热器的综合传热性能要优于12 、30、40°螺旋角的螺旋折流板换热器。

关键词: 螺旋角, 　螺旋折流板, 　弓形折流板, 　传热系数, 　换热器

YANG Jun,CHEN Bao -dong,et al. Perfo rmance Comparison Between Helical and Segmental Baff le Board Heat Exchangers and Optimization of Helix Angle[J]. Journal of Liaoning Petrochemical University, 2005, 25(2): 59-62.

杨　军, 陈保东,孙成家. 螺旋与弓形折流板换热器性能对比及螺旋角优化[J]. 辽宁石油化工大学学报, 2005, 25(2): 59-62.

[1]	Zhunshun Zhang, Qiang Guo, Guiyang Ma, Yang Li, Hongwei Chen. Simulation Study on Improving the Safety of Heat Exchanger by Adding Thermal Insulation Layer at the Pipe End [J]. Journal of Liaoning Petrochemical University, 2023, 43(2): 67-71.
[2]	Liao Kexi1， Peng Hao1， Zeng Zhaoxiong2， He Guoxi1， Miao Chunjiang3， Leng Jihui1. Study on the Causes of Liquid Accumulation in Shale Gas Testing Platform and the Countermeasures [J]. Journal of Liaoning Petrochemical University, 2021, 41(1): 37-44.
[3]	Yan Tengfei，Jiang Haojun，Jiang Wenquan，Li Qiang，Yue Yunxue，Yu Ruizhe. The Corrosion Mechanism and Protection Technology of the Heat Exchanger Bundle in Visbreaking Unit [J]. Journal of Liaoning Petrochemical University, 2019, 39(5): 83-87.
[4]	Guo Tu， Ma Guiyang， Huang Tenglong， Shi Long， Sun Hao. Numerical Simulation of ShellSide Fluid Flow and Heat  Transfer in Spherical Baffle Heat Exchanger [J]. Journal of Liaoning Petrochemical University, 2014, 34(2): 41-44.
[5]	GUO Tu， MA Guiyang， SHI Long， HUANG Tenglong. Effect of Baffle Opening on the Performance of ShellandTube Heat Exchanger [J]. Journal of Liaoning Petrochemical University, 2013, 33(3): 47-50.
[6]	LI Jun-jun, LIU Feng. Failure Analysis on Corrosion Failure of Heat Exchanger and Proposal [J]. Journal of Liaoning Petrochemical University, 2012, 32(3): 54-57.
[7]	S UN Chun - y i. Worktable Design of High - Altitude Ex tract ing Core Working Vehicle for Heat Exchanger [J]. Journal of Liaoning Petrochemical University, 2007, 27(1): 37-39.
[8]	CHEN Jin -mei,WANG Mao -ting. Reliability Analysis of Heat Exchanger' s Fatigue Life [J]. Journal of Liaoning Petrochemical University, 2006, 26(1): 55-57.
[9]	CHEN Shi -xing,ZHANG Zhen -hua. A Kind of Curved Surface Helical Baf fle Heat Exchanger With Special Form [J]. Journal of Liaoning Petrochemical University, 2005, 25(1): 61-63.

Perfo rmance Comparison Between Helical and Segmental Baff le Board Heat Exchangers and Optimization of Helix Angle

螺旋与弓形折流板换热器性能对比及螺旋角优化

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 9

Recommended Articles

Metrics