Surface Hardness Af ter Grinding for Hardened Bearing Steel

Journal of Liaoning Petrochemical University ›› 2005, Vol. 25 ›› Issue (2): 42-45.

Previous Articles Next Articles

Surface Hardness Af ter Grinding for Hardened Bearing Steel

1.School of Mechanical Engineering & Automation , Fuzhou University , Fuzhou Fujian 350002 , P .R .China ;
2 .Fushun Higher Vocational Technical Institue , Fushun Liaoning 113006, P .R .China

Received:2004-12-09 Published:2005-06-20 Online:2017-04-18

淬硬轴承钢磨削后的表面硬度

冯宝富¹, 马春荣²

1.福州大学机械工程及自动化学院, 福建福州350002;
2.抚顺职业技术学院, 辽宁抚顺113006

作者简介:冯宝富(1968 -), 男, 山东莱阳市, 讲师, 博士。
基金资助:
福建省青年科技人才创新基金资助项目(2004J003)

Abstract

Abstract:

　Thermal model based on Jeager' s heat resource theory was established to predict grinding surface temperature .The relations between the tempering hardness and the temperature for hardened bearing steel and low alloy steel were studied.The tempering behavior model of relationship between tempering hardness and temperature was set up.Tempering resulting from grinding heat caused surface hardness changes of hardened steels after grinding .Combining the tempering behavior with the grinding thermal model , the change in surface hardness due to grinding heat could be predicted .Experiments of high speed grinding for GCr15 bearing steel were done .The effects of work speed and grinding depth on surface hardness were researched .The predictive values accord with the experimental results .

Key words: Tempering behavior , Grinding , Surface integrity , Surface hardness

摘要： 基于Jeager 的移动热源理论建立热模型, 预测磨削表面温度。研究了淬硬轴承钢及一些低合金钢回火硬度与回火温度的关系。建立了回火硬度与回火温度关系的回火效应模型。磨削热导致回火引起淬硬钢磨削后表面硬度变化。通过合并磨削热模型和回火效应可以预测工件磨削后的表面硬度变化。进行了淬硬GCr15 轴承钢的高速磨削试验, 研究了工件速度和磨削深度对磨削后表面硬度的影响。试验值与预测值能够较好吻合。

关键词: 　回火效应, 　磨削, 　表面完整性, 　表面硬度

FENG Bao -fu,MA Chun -rong. Surface Hardness Af ter Grinding for Hardened Bearing Steel[J]. Journal of Liaoning Petrochemical University, 2005, 25(2): 42-45.

冯宝富, 马春荣. 淬硬轴承钢磨削后的表面硬度[J]. 辽宁石油化工大学学报, 2005, 25(2): 42-45.

[1]	Hua ZHOU, Nan JIA, Yaxuan LU, Xiangchen MENG, Yongxian HUANG. Microstructures and Wear Properties of Ultrafine⁃Grained Cu via Multiple Rotational Rolling under Deep Cooling Condition [J]. Journal of Liaoning Petrochemical University, 2024, 44(2): 50-54.
[2]	Xincheng GUO, Jia LI, Ruixin BAO, Wentao ZHANG, Wei HOU. Static and Dynamic Analysis of New Billet Grinding Equipment [J]. Journal of Liaoning Petrochemical University, 2024, 44(1): 64-70.
[3]	Jiaqi Zheng, Changfu Liu, Xiaodan Zhu, Yu Wang, Shuo Zhang. Research Progress of Grinding Technology with Minimum Quantity Lubrication [J]. Journal of Liaoning Petrochemical University, 2023, 43(4): 84-91.
[4]	Ming Cai, Tao Zhu, Xingjun Gao, Jinqi Bao. Research Status of Grinding Technology of Nickel⁃Based Superalloy [J]. Journal of Liaoning Petrochemical University, 2023, 43(3): 60-68.
[5]	Dong He， Zhu Xiangzhe， Chen Li. Analysis of Vibration Characteristic of Spindl⁃Bearing System of High Speed Grinding Machine [J]. Journal of Liaoning Petrochemical University, 2021, 41(1): 56-60.
[6]	Zhao Henghua， Mu Hongping， Zhao Xueyang. Modification of the Grinding Force in Mesoscopic and Macroscopic [J]. Journal of Liaoning Petrochemical University, 2016, 36(5): 47-50.
[7]	Luo Kuanyong, Han Dongyun, Cao Zubin, Song Guanlong, Li Sichao, Sun Shuying. Separation of Yumen Oil Sands by Wet-Grinding and Washing Treatment [J]. Journal of Liaoning Petrochemical University, 2016, 36(4): 5-7.
[8]	Ai Dong, Zhao Rongxiang, Li Xiuping, Xu Zhude. Preparation of CdS/Ag2S Composite Photocatalyst and Its Photocatalytic Performance [J]. Journal of Liaoning Petrochemical University, 2015, 35(4): 1-4,15.

Surface Hardness Af ter Grinding for Hardened Bearing Steel

淬硬轴承钢磨削后的表面硬度

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 8

Recommended Articles

Metrics