基于Inventor的抽浆泵参数化设计及运动仿真

辽宁石油化工大学学报 ›› 2009, Vol. 29 ›› Issue (2): 46-48.

基于Inventor的抽浆泵参数化设计及运动仿真

付钢,卢紫微,张燕

辽宁石油化工大学计算机与通信工程学院,辽宁抚顺113001

收稿日期:2008-09-16 出版日期:2009-06-25 发布日期:2017-07-05
作者简介:付钢(1978-),男,山东临朐县,在读硕士
基金资助:
辽宁省自然科学基金资助项目(20052211

Pump for Raising Slurry Parameterization Design and Movement Simulation Based on Inventor

FU Gang，LU Zi-wei，ZHANG Yan

School of Computer and Communication Engineering，Liaoning University of Petroleum & Chemical Technology, Fushun Liaoning 113001, P.R.China

Received:2008-09-16 Published:2009-06-25 Online:2017-07-05

摘要/Abstract

摘要： 介绍了基于Inventor的抽浆泵系列产品参数化设计的实现方法,把抽浆泵整体分为零件和部件两层
结构,首先确立部件模型的装配,通过参数表和程序确定部件的规格。然后再将零件建模,最后组成总装配图。此
方法提高了设计效率,根据装配建模的设计结果,对抽浆泵进行运动仿真设计,以检验设计的正确性,最终设计者和
用户能够更加直观地看到该产品的工作过程。

关键词: 抽浆泵 , 运动仿真 , Inventor

Abstract: The parametric design of serial pumps for raising slurry based on Inventor was introduced. Pump for raising slurry can be divided into the components and the parts as a whole. First, established the assembly of the part model, and determined the part's specification through the parameter list and the procedure. Then modeled the components and finally composed again the assembly drawing. This method raised the efficiency of design ; carried out the movement simulation design according to the assembly modeling's design result ; examined the accuracy of the design; and finally the designer and the user can intuitively see the work process of this product.

Key words: Pump for raising slurry , Movement simulation , Inventor

付钢,卢紫微,张燕. 基于Inventor的抽浆泵参数化设计及运动仿真[J]. 辽宁石油化工大学学报, 2009, 29(2): 46-48.

FU Gang，LU Zi-wei，ZHANG Yan. Pump for Raising Slurry Parameterization Design and Movement Simulation Based on Inventor[J]. Journal of Liaoning Petrochemical University, 2009, 29(2): 46-48.