Journal of Petrochemical Universities

Journal of Petrochemical Universities ›› 2024, Vol. 37 ›› Issue (3): 49-57.DOI: 10.12422/j.issn.1006-396X.2024.03.007

• Catalysts and Catalytic Materials • Previous Articles     Next Articles

OER Performance of Ce-CoFe-P@CC Nanocomposite Catalytic System

Yanqin BI(), Liangliang CHEN, Chunyang DUAN, Zenghua ZHAO()   

  1. School of Petrochemical Engineering,Liaoning Petrochemical University,Fushun Liaoning 113001,China
  • Received:2024-02-27 Revised:2024-04-03 Published:2024-06-25 Online:2024-06-18
  • Contact: Zenghua ZHAO

Ce-CoFe-P@CC纳米复合催化体系的OER性能

毕艳琴(), 陈亮亮, 段春阳, 赵增华()   

  1. 辽宁石油化工大学 石油化工学院,辽宁 抚顺 113001
  • 通讯作者: 赵增华
  • 作者简介:毕艳琴(1997-),女,硕士研究生,从事电催化分解水方面的研究;E-mail:2053547155@qq.com
  • 基金资助:
    国家自然科学基金项目(52273075);辽宁石油化工大学人才工程资助项目(1100011651)

Abstract:

Powder electrocatalysts usually need adhesives for electrocatalytic performance testing,resulting in an increase in resistance,a decrease in catalyst load,and easy stripping of the catalyst under long-time testing.Ce-doped CoFe layered bimetallic hydroxides were uniformly grown on carbon cloth by one-step hydrothermal method,and the adhesive-free Ce-CoFe-P@CC self-supporting electrocatalyst was obtained by further phosphating treatment.It was characterized by XRD,SEM,TEM,N2 adsorption-desorption isotherm and XPS,and its electrocatalytic OER performance was tested.The results show that the synthesized electrode material has regular thin nanosheet morphology,and the length and thickness of the nanoflake are 2.50 μm and 0.05 μm, respectively.The doping of Ce and P optimizes the electronic structure of CoFe-LDH,promotes the charge transfer,increases the catalytically active site,and improves the durability of the electrode.The Ce-CoFe-P@CC only needs an overpotential of 187 mV at a current density of 10 mA/cm2,showing excellent OER catalytic performance.

Key words: Oxygen evolution reaction, Electrocatalysis, CoFe layered bimetallic hydroxide, Rare earth metal, Phosphide

摘要:

对粉末电催化剂进行电催化性能测试时通常需要加入黏合剂,该测试容易导致催化剂电阻增加,催化剂负载量减少,并且在长时间测试下催化剂容易被剥离。采用一步水热法使Ce掺杂CoFe层状双金属氢氧化物在碳布上均匀生长,并进一步磷化处理直接获得了无需黏合剂的Ce-CoFe-P@CC自支撑电极材料;通过XRD、SEM、TEM、N2吸附-脱附等温曲线和XPS对电极材料进行表征,并对其进行了电催化OER性能测试。结果表明,合成得到的电极材料具有规则的纳米片形貌,纳米片长度和厚度分别为2.50 μm和0.05 μm;Ce和P的掺杂优化了CoFe-LDH电子结构,促进了电荷转移,增加了催化活性位点,提高了电极的耐久性;Ce-CoFe-P@CC在10 mA/cm2的电流密度下只需187 mV的过电势,表现出优异的OER催化性能。

关键词: 析氧反应, 电催化, CoFe层状双金属氢氧化物, 稀土金属, 磷化物

CLC Number: 

Cite this article

Yanqin BI, Liangliang CHEN, Chunyang DUAN, Zenghua ZHAO. OER Performance of Ce-CoFe-P@CC Nanocomposite Catalytic System[J]. Journal of Petrochemical Universities, 2024, 37(3): 49-57.

毕艳琴, 陈亮亮, 段春阳, 赵增华. Ce-CoFe-P@CC纳米复合催化体系的OER性能[J]. 石油化工高等学校学报, 2024, 37(3): 49-57.