Analysis of the Flow Rule of Rubber Melts in the Expansion Dryer

doi:10.3969/j.issn.1672-6952.2018.03.015

Journal of Liaoning Petrochemical University ›› 2018, Vol. 38 ›› Issue (03): 79-83.DOI: 10.3969/j.issn.1672-6952.2018.03.015

Previous Articles Next Articles

Analysis of the Flow Rule of Rubber Melts in the Expansion Dryer

Wu Xianwei¹，Deng Zilong¹，Guo Yuquan¹，Luo Lin²

（1.School of Mechanical Engineering，Liaoning Shihua University，Fushun Liaoning 113001，China； 2.China Petroleum and Audit Service Center，Beijing 100028，China）

Received:2017-05-04 Revised:2017-06-25 Published:2018-06-25 Online:2018-07-11

膨胀干燥机橡胶熔体流动数值模拟分析

吴显威¹，邓子龙¹，郭玉泉¹，罗琳²

（1.辽宁石油化工大学机械工程学院，辽宁抚顺113001；2.中国石油审计服务中心，北京100028）

通讯作者: 邓子龙（1967-），男，硕士，教授，从事机电液一体化、机械现代设计与理论方面的研究；E-mail：331643737@qq.com
作者简介:(吴显威（1992-），女，硕士研究生，从事流体机械内部流动及性能研究；E-mail：1426399580@qq.com

Abstract

Abstract: The expansion dryer was the critical equipment for the finishing unit of rubber plant. It could take off 90% moisture in the rubber melt. The flow behavior of rubber melts in the channel of the expansion dryer was analyzed by FLUENT. Observing the nephogram of the distribution of rubber melts speeds and stress nephogram, the flow rule of rubber melts in the expansion dryer was analyzed. The following research directions were indicated.

Key words: The expansion dryer, FLUENT, Rubber melts, The flow rule

摘要： 膨胀干燥机是橡胶后处理的重要设备，通过膨胀干燥机可脱去橡胶熔体中90%的水分。基于FLUENT软件，对橡胶熔体在膨胀干燥机流道中的流动进行数值分析，并根据速度分布云图及压力分布云图，分析橡胶熔体在流道中的流动规律。研究结果可为进一步研究工艺参数对橡胶质量的影响奠定基础。

关键词: 膨胀干燥机, FLUENT, 橡胶熔体, 流动规律

Wu Xianwei，Deng Zilong，Guo Yuquan，Luo Lin. Analysis of the Flow Rule of Rubber Melts in the Expansion Dryer[J]. Journal of Liaoning Petrochemical University, 2018, 38(03): 79-83.

吴显威，邓子龙，郭玉泉，罗琳. 膨胀干燥机橡胶熔体流动数值模拟分析[J]. 辽宁石油化工大学学报, 2018, 38(03): 79-83.

[1]	Sun Zhanwei， Zhu Xiangzhe. Numerical Simulation of Gas⁃Liquid Two⁃Phase Splitting Characteristics of T⁃Shaped Multi⁃Branch Pipeline [J]. Journal of Liaoning Petrochemical University, 2021, 41(2): 65-72.
[2]	Liu Zhiming， Dong Jie， Xie Yujun. Numerical Simulation of Mixing Characteristics of Crude Oil by SK Static Mixer [J]. Journal of Liaoning Petrochemical University, 2020, 40(2): 73-77.
[3]	Wu Xianwei，Deng Zilong，Chen Fang. Numerical Analysis of the Flow of Rubber Melt under Different Production Processes [J]. Journal of Liaoning Petrochemical University, 2019, 39(4): 77-82.
[4]	Gao Dezhen, Li Jialu, Li Dechen, Liu Shu, Wang Xiaoning. Numerical Analysis of the GasSolid TwoPhase Based on FLUENT [J]. Journal of Liaoning Petrochemical University, 2015, 35(4): 5-8，15.
[5]	Liang Wenkai， Deng Wenjun， Cong Runzhi， Xie Nan， Lyu Yuling. Investigation of CrudeOil Temperature Distribution in the Storage Tank Based on FLUENT [J]. Journal of Liaoning Petrochemical University, 2014, 34(5): 39-43.
[6]	DU Ming-jun，MA Gui-yang，SU Kai. Numerical Simulation of Petrol Temperature Drop in Pipelines During Stopping Transportation Under Water [J]. Journal of Liaoning Petrochemical University, 2010, 30(3): 51-54.

Analysis of the Flow Rule of Rubber Melts in the Expansion Dryer

膨胀干燥机橡胶熔体流动数值模拟分析

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 6

Recommended Articles

Metrics