Optimization of the QuickOpening Structure with  ToothLocked Sintering Furnace Cover

doi:10.3696/j.issn.1672-6952.2015.04.010

Journal of Liaoning Petrochemical University ›› 2015, Vol. 35 ›› Issue (4): 44-47.DOI: 10.3696/j.issn.1672-6952.2015.04.010

Previous Articles Next Articles

Optimization of the QuickOpening Structure with  ToothLocked Sintering Furnace Cover

Chang Peichen， Cai Yongmei， Xie Yujun

（Liaoning Shihua University，Fushun Liaoning 113001，China）

Published:2015-08-25 Online:2015-08-14

烧结炉端盖齿啮式连接快开结构优化

常佩琛,蔡永梅,谢禹钧

( 辽宁石油化工大学, 辽宁抚顺1 1 3 0 0 1)

通讯作者: 谢禹钧( 1 9 6 0 - ) , 男, 博士, 教授, 从事结构失效风险分析、灾害预防、油气输送管道结构完整性评估、断裂力学、复合材料结构优化设计等方面的研究; E - m a i l : y j x i e @ l n p u. e d u. c n
作者简介:常佩琛( 1 9 8 4 - ) , 男, 硕士研究生, 从事化工机械方面的研究; E - m a i l : c h a n g l n s y@1 6 3. c o m。

Abstract

Abstract: The finite element analysis software ANSYS was used to propose a parametric model of the quickopening structure with toothlocked sintering furnace cover. The structure design was optimized by using weight parameter as the objective function and using allowable stress as constraints. Based on the optimal sizes the intensity design requirements were met and the weight of the structure was reduced effectively. Data reference for the similar quickopening structure design was given in this paper.

Key words: Tooth locked, Quickopening structure, Optimal design, Finite element analysis, Intensity evaluation

摘要： 应用有限元分析软件 AN S Y S, 对烧结炉端盖齿啮式连接快开结构进行了参数化建模。以质量为目标函数, 以许用应力为约束条件, 对该结构的尺寸进行了优化。结果表明, 优化后的尺寸可满足强度设计要求, 并可有效地减轻结构质量, 为类似的快开结构设计提供了数据依据。

关键词: 齿啮式, 快开结构, 优化设计, 有限元分析, 强度评定

Chang Peichen， Cai Yongmei， Xie Yujun. Optimization of the QuickOpening Structure with  ToothLocked Sintering Furnace Cover[J]. Journal of Liaoning Petrochemical University, 2015, 35(4): 44-47.

常佩琛,蔡永梅,谢禹钧. 烧结炉端盖齿啮式连接快开结构优化[J]. 辽宁石油化工大学学报, 2015, 35(4): 44-47.

[1]	Songyu Yang, Yili Duo, Tie Sun, Chengbin Wang. Finite Element Analysis of Influence of Nut Washer on Stress Distribution of Bolt Flange Joint [J]. Journal of Liaoning Petrochemical University, 2022, 42(3): 62-67.
[2]	Zhengyi Wei, Xingjun Gao, Zilong Deng, Lin Fan. Research on Cutting Performance of GH4169 in Ultrasonic Elliptical Vibration Turning Based on ABAQUS [J]. Journal of Liaoning Petrochemical University, 2021, 41(6): 67-71.
[3]	Liu Zhe， Chen Shouzhi， Zhang Juwei， Cui Shuang, Bao Ruixin. Finite Element Analysis of Pressure Vessel Joint Structure under External Load [J]. Journal of Liaoning Petrochemical University, 2021, 41(1): 68-72.
[4]	Zhu Yuanchi，Wu Yuguo. Study on Mechanical Behavior of Buried Corrosion Pipeline in Frozen Soil Area Based on Finite Element Analysis [J]. Journal of Liaoning Petrochemical University, 2019, 39(5): 65-72.
[5]	Liu Meiling. The Analysis of Drilling Tool Failure Precaution in Gas Drilling [J]. Journal of Liaoning Petrochemical University, 2019, 39(2): 59-62.
[6]	Li Siyu， Zhang Juwei， Lin Haibo. Safety Analysis of Three⁃Way Pipe with Lack of Fusion Defects [J]. Journal of Liaoning Petrochemical University, 2019, 39(1): 71-76.
[7]	Zhao Minxin, , Shi Hang , Li Ping. Research on Active Shape Control of Piezoelectric Thin-Shell Structure [J]. Journal of Liaoning Petrochemical University, 2018, 38(1): 79-83.
[8]	Qian Han，Zhang Yingying，Gao Lei. Stress Analysis of Pressure Vessel Tube Sheet Based on ANSYS Workbench Software [J]. Journal of Liaoning Petrochemical University, 2018, 38(06): 70-75.
[9]	Wang Haiyan， Zhao Ling， Wu Ming， Ren Shuai， Yang Xu. The Finite Element Analysis of Crossing Pipeline Based on ANSYS [J]. Journal of Liaoning Petrochemical University, 2016, 36(2): 25-27.
[10]	Wang Qiang， Wang Qingguo. The Finite Analysis of Portable Tank [J]. Journal of Liaoning Petrochemical University, 2016, 36(2): 45-48.
[11]	Wang Qiang， Gao Si， Wang Qingguo， Yang Chunming， Yin Quan， Guo Zhiying. The Analysis of Four Corners Tower [J]. Journal of Liaoning Petrochemical University, 2016, 36(1): 46-51.
[12]	Li Qiang， Deng Zilong， Chen Hongjuan， Peng Xing. No Beam Pumping Unit's Dynamic Analysis [J]. Journal of Liaoning Petrochemical University, 2014, 34(4): 50-54.
[13]	LIU Fumin, LI Shuyun, XIE Yujun, CAI Yongmei. Intensity Design and Distribution of the QuickOpening  Mechanism on the HighPressure Sintering Furnace [J]. Journal of Liaoning Petrochemical University, 2013, 33(1): 86-89.
[14]	HAO Jiao， LIN Chang-jian. Optimal Design of the Clamp of the Sensor in Surveying Ice-Jamming Position of Pipe [J]. Journal of Liaoning Petrochemical University, 2010, 30(1): 60-62.
[15]	JIN Xiao-na， LI Fan， ZHU Xiang-zhe . Finite Element Analysis of Dynamics Characteristics of Rotor System of Large-Scale Unit Machine [J]. Journal of Liaoning Petrochemical University, 2008, 28(4): 61-64.

Optimization of the QuickOpening Structure with  ToothLocked Sintering Furnace Cover

烧结炉端盖齿啮式连接快开结构优化

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics