关键词: 废机油 , 再生工艺 , 常减压蒸馏 , 精制 , 络合剂

Abstract: The pretreatment of spent lubricating oil to remove part of the water and impurities was carried out firstly, then the flash device are used for further removal of water, followed by the distillation in atmospheric and vacuum distillation unit. A lowfreezingpoint, high stable light diesel were produced in the atmospheric distillation zone; different kinds of lubricating base oils which are all available resources were produced by vacuum distillation segment combined with complex agent refiningalkaline cleaningclay refining process. Additives were added finally to improve the oil quality. The additional purification process conditions were identified: the mass fraction of acid solvent 4.5% which contains the mass fraction complexing agent 1.5% for pickling; 1% NaOH aqueous solution with its mass fraction of 40% were added for alkaline cleaning at 40 ℃, then 3% clay was added and stirred for 25～30 min at the temperature less than 120 ℃. This processing technology not only reduces the pollution effectively, but also greatly improves the reutilization of waste oil.

Key words: Spent lubricating oil ,  Regeneration process ,  Atmospheric and vacuum distillation unit , Refining , Complex agent