辽宁石油化工大学学报 ›› 2013, Vol. 33 ›› Issue (2): 73-75.

• 化工机械与计算机 • 上一篇    下一篇

危险度评价法在重整装置中的应用

屈晓雪,王茂廷,郝翊彤,刘艳,司广顺   

  • 收稿日期:2012-10-29 出版日期:2013-06-25 发布日期:2017-07-14

Application of Risk Degree Assessment Method in Reforming Unit

QU Xiaoxue1, WANG Maoting1, HAO Yitong2, LIU Yan3,SI Guangshun4   

  1. 1.School of Mechanical Engineering, Liaoning Shihua University, Fushun Liaoning 113001,China; 2.Chemical Engineering Institute,China University of Petroleum(Beijing),Beijing 102249,China; 3. Science and Technology Taizhou College of Njust, Taizhou Jiangsu 225300,China; 4. PetroChina Dushanzi Petrochemical Company, Karamay Xinjiang 833600, China
  • Received:2012-10-29 Published:2013-06-25 Online:2017-07-14

Abstract: In order to determine the basic causes of major accidents which may occur in the reforming unit, and take the countermeasures of safety, this paper used the risk degree assessment method for safety assessment about the reforming unit. Hidden danger of the unit was found by the analysis of risk, and intrinsic risk grades of the equipment units was divided by the risk assessment table. Results show that the unit has very high intrinsic risk grade, in which the existence of a large number of hazardous substances, most equipments because of the high temperature and pressure, corrosion and other factors can easily lead to the leakage of medium, so as to cause fire and explosion. According to the results of the assessment, propose the corresponding safety measures to prevent accidents, ensure the production running smoothly.

Key words: Reforming unit , Risk degree ,  Safety assessment ,  Safety measures

引用本文

屈晓雪,王茂廷,郝翊彤,刘艳,司广顺. 危险度评价法在重整装置中的应用[J]. 辽宁石油化工大学学报, 2013, 33(2): 73-75.

QU Xiaoxue, WANG Maoting, HAO Yitong, LIU Yan,SI Guangshun. Application of Risk Degree Assessment Method in Reforming Unit[J]. Journal of Liaoning Petrochemical University, 2013, 33(2): 73-75.

使用本文

0
    /   /   推荐

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://journal.lnpu.edu.cn/CN/

               https://journal.lnpu.edu.cn/CN/Y2013/V33/I2/73