减压塔汽提段规整填料对减压拔出率的影响

doi:10.3696/j.issn.1672-6952.2010.04.005

辽宁石油化工大学学报 ›› 2010, Vol. 30 ›› Issue (4): 15-18.DOI: 10.3696/j.issn.1672-6952.2010.04.005

减压塔汽提段规整填料对减压拔出率的影响

张龙，齐慧敏，李宝忠

抚顺石油化工研究院，辽宁抚顺 113001

收稿日期:2010-09-29 出版日期:2010-12-20 发布日期:2017-07-17

Influence of Using Structural Packing in Stripping Section of Vacuum Tower on Pull-Out Rate

ZHANG Long, QI Hui-min, LI Bao-zhong

Fushun Research Institute of Petroleum and Petrochemicals, Fushun Liaoning 113001, P.R.China

Received:2010-09-29 Published:2010-12-20 Online:2017-07-17

摘要/Abstract

摘要： 原油减压深拔技术是增加轻质油收率代表性技术之一。通过减压蒸馏塔汽提段工艺参数对拔出率的影响进行研究，汽提段采用塔盘和规整填料对汽提效率的作用进行了讨论，并对汽提段采用规整填料后塔内填料的结焦问题进行了分析。结果表明，汽提段采用规整填料对提高减压拔出率具有非常重要的意义，且不会发生结焦。

关键词: 减压深拔, 汽提段, 拔出率, 规整填料, 结焦

Abstract: Vacuum deep distillation of crude oil is one of representative technology for increasing the yield of light oil. The influence of process parameters in stripping section of vacuum tower on pull-out rate was tested, and the impact of tray or structural packing used in the stripping section of tower on strippin efficiency was disscussed. Furthermore, the coking of structural packing in the stripping section was analyzed. Finally, structural packing in the stripping section showed great impact on enhancing vacuum pull-out tate and would not lead to the coking in the stripping section.

Key words: Vacuum deep cut, Stripping section, Pull-out rate, Structural packing, Coking

张龙，齐慧敏，李宝忠. 减压塔汽提段规整填料对减压拔出率的影响[J]. 辽宁石油化工大学学报, 2010, 30(4): 15-18.

ZHANG Long, QI Hui-min, LI Bao-zhong. Influence of Using Structural Packing in Stripping Section of Vacuum Tower on Pull-Out Rate[J]. Journal of Liaoning Petrochemical University, 2010, 30(4): 15-18.

[1]	宋官龙,张国伟,宫建远,赵德智. LWS - 2 0 1添加剂强化原油蒸馏及工业应用[J]. 辽宁石油化工大学学报, 2014, 34(5): 4-6.
[2]	王　雷. NMP 加助剂精制润滑油馏分结焦量的考察`[J]. 辽宁石油化工大学学报, 2005, 25(2): 20-22.

减压塔汽提段规整填料对减压拔出率的影响

Influence of Using Structural Packing in Stripping Section of Vacuum Tower on Pull-Out Rate

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 2

编辑推荐

Metrics