辽宁石油化工大学学报 ›› 2008, Vol. 28 ›› Issue (4): 48-50.

• 化工机械 • 上一篇    下一篇

关于橡胶O形密封圈的Ansys分析

王 杰谢禹钧*   

  1. 辽宁石油化工大学机械学院, 辽宁抚顺 113001)
  • 收稿日期:2008-05-19 出版日期:2008-12-20 发布日期:2017-07-25

Ansys Analysis of Rubber O-Sealing Ring

WANG Jie, XIE Yu-jun*   

  1. School of Mechanical Engineering, Liaoning University of Petroleum & Chemical Technology, Fushun Liaoning 113001, P.R.China
  • Received:2008-05-19 Published:2008-12-20 Online:2017-07-25

摘要: 利用有限元分析软件ANSYS,建立了橡胶O形圈及其边界的有限元模型,分析了不同油压和初始压缩率下形状的变化和应力的分布,以及最大接触压力和油压、初始压缩率的关系,描述了O形圈可能出现裂纹的位置,为合理地安装和使用提供了理论依据。

关键词: O形密封圈, Ansys, 接触压力, 有限元

Abstract: By utilizing finite element analysis software ANSYS, a finite element model for rubber O-sealing ring and its boundry was set up.The change of shape and stress distribution under different oil pressure and initial compressibility was analyzed, and the relations between maximum contact stress, oil pressure and initial compressibility was deduced. Then the position of possible crack was described , which is a theoretical basis for reasonable installation and use.

Key words: O-sealing ring, Ansys, Contact pressure, Finite element

引用本文

王 杰, 谢禹钧. 关于橡胶O形密封圈的Ansys分析[J]. 辽宁石油化工大学学报, 2008, 28(4): 48-50.

WANG Jie, XIE Yu-jun. Ansys Analysis of Rubber O-Sealing Ring[J]. Journal of Liaoning Petrochemical University, 2008, 28(4): 48-50.

使用本文

0
    /   /   推荐

导出引用管理器 EndNote|Ris|BibTeX

链接本文: https://journal.lnpu.edu.cn/CN/

               https://journal.lnpu.edu.cn/CN/Y2008/V28/I4/48