PACKER 内拉杆的有限元模态分析

辽宁石油化工大学学报 ›› 2007, Vol. 27 ›› Issue (1): 50-52.

PACKER 内拉杆的有限元模态分析

赵　斌

辽宁石油化工大学机械工程学院, 辽宁抚顺113001

收稿日期:2005-12-14 出版日期:2007-03-20 发布日期:2017-07-05
作者简介:赵斌(1978 - ), 男, 辽宁抚顺市, 硕士。

Finite Element Modal Analysis for PACKER Inner Pull Rod

School of Mechanical Engineering , Liaoning University of Petroleum & Chemical Technology ,Fushun Liaoning 113001 , P. R. China

Received:2005-12-14 Published:2007-03-20 Online:2017-07-05

摘要/Abstract

摘要： 为了提高PACKER 内拉杆的抗振能力, 进行振动特性分析是十分必要的。利用ANSYS 软件, 分别采用粗网格和细网格两种方案进行网格划分, 运用子空间法进行模态分析, 得出PACKER 内拉杆的前5 阶固有频率和振型。理论计算与实验测得的结果基本一致, 表明数值模拟技术是正确高效的手段, 并得出了网格粗细对模态分析结果无关。采用粗网格可以提高计算效率。

关键词: 　PACKER 内拉杆, 　模态分析, 　ANSYS 软件, 　固有频率

Abstract:

　In order to improve the antivibration ability of PACKER inner pull rod , it is necessary to analyze its vibration char acteristics. On the basis of ANSYS software , grid partition adopted coarse grids and fine grids respectively , modal analysis was implemented by utilizing a subspace method, and the first five inherent frequencies and vibration type were obtained. That theory results accord basically with testing results shows that numerical simulation technology is an efficient method and the thickness of grids doesn't influence modal analysis results. Using coarse grids can improve calculative efficiency .

Key words: 　PACKER inner pullrod , Modal analysis , ANSYS software , Inherent frequency

赵　斌. PACKER 内拉杆的有限元模态分析[J]. 辽宁石油化工大学学报, 2007, 27(1): 50-52.

ZHAO Bin. Finite Element Modal Analysis for PACKER Inner Pull Rod[J]. Journal of Liaoning Petrochemical University, 2007, 27(1): 50-52.

[1]	林学洋，高兴军，王月，邓子龙. 双悬臂式压电振动给料器设计与性能分析[J]. 辽宁石油化工大学学报, 2021, 41(3): 77-81.
[2]	徐晶晶，石成江，高鹏. 基于ANSYS的井下齿轮传动系统振动分析[J]. 辽宁石油化工大学学报, 2019, 39(1): 61-64.
[3]	王强,高思,王庆国,杨春明,尹权,郭志英. 方形塔的有限元分析[J]. 辽宁石油化工大学学报, 2016, 36(1): 46-51.