石油化工高等学校学报

石油化工高等学校学报 ›› 2012, Vol. 25 ›› Issue (5): 64-67.DOI: 10.3969/j.issn.1006-396X.2012.05.016

• 化工机械 • 上一篇    下一篇

冷热原油交替顺序输送优化模型研究

吴明1,周诗岽2,王雷1,赵玲3   

  1. (1.辽宁石油化工大学石油天然气工程学院,辽宁抚顺113001;2.常州大学油气储运技术省重点实验室,江苏常州213164;3.辽宁石油化工大学职业技术学院,辽宁抚顺113001)
  • 收稿日期:2012-09-12 出版日期:2012-10-25 发布日期:2012-10-25
  • 作者简介:吴明（１９６１－），男，辽宁铁岭市，教授，博士
  • 基金资助:
    辽宁省优秀人才计划项目基金（ＬＲ２０１１００９）；辽宁省重大攻关项目基金（２００８２３０００４）

Optimization Model Research in Process of Batch Transportation of Cool and Hot Crude Oil

  1. 1. College of Petroleum Engineering, Liaoning Shihua University, Fushun Liaoning 113001, P. R. China;  2. Jiangsu Provincial Key Laboratory of Oil & Gas Storage and Transportation Technology, ChangzhouUniversity, Changzhou Jiangsu 213164, P. R. China;  3. Vocatinal Technology College, Liaoning Shihua University, Fushun Liaoning 113001, P. R. China
  • Received:2012-09-12 Published:2012-10-25 Online:2012-10-25

PDF

摘要： 冷热原油交替顺序输送总能耗费用主要包括加热炉的燃料费用和输油泵的动力费用。在保证安全输油任务的前提下，如何使输油总能耗达到最小对于降低企业输油成本具有非常重要的意义。以输油总能耗最小为目标函数，建立冷热原油交替顺序输送优化模型。模型中将顺序输送分为4个时间阶段：冷油头加热非稳态阶段、冷油不加热准稳态阶段、冷油尾加热非稳态阶段和热油加热准稳态阶段。两个准稳态输送阶段采用两层嵌套法来求解，两个非稳态阶段采用两层嵌套法和满足高凝油油头（油尾）进站温度相结合的方法优选输油方案。结合工程实际给出冷热原油交替顺序输送优选算例，研究成果可为制定冷热油交替输送经济运行方案提供依据。

关键词: 原油管道 , 顺序输送 , 优化 , 两层嵌套法

Abstract: To the batch transportation of cool and hot crude oil, the total cost of transporting oil consists of fuel cost of fire furnace and power consumption cost of oil pump. It is very important to make the total consumption minimal under the premise of accomplishing safely transporting task. Taking the minimal of total energy consumption as the objective function, a batch transportation model of cool and hot crude oil pipeline was set up. The batch transportation in the model was divided into four time stages that unsteady stage of the cold oil head heated, quasi-steady-state stage of the cold oil unheated, unsteady stage of the cold oil end heated and quasi-steady-state phase of the hot oil heated. Two-layer nesting method was used to solve the quasi-steady-state stage; both two-layer nesting method and meeting the pitted in-station temperature of oil head (oil end) were used to select the optimization scheme. Combined the engineering practice, the optimization example of the batch transportation of cool and hot crude oil was given, and the research results can provide a decision-making basic for optimizing transmission of the batch transportation of cool and hot crude oil.

Key words: Crude oil pipeline,    ,  Batch transportation,    ,  Optimization,    , Two-layer nesting method

引用本文

吴明,周诗岽,王雷,赵玲. 冷热原油交替顺序输送优化模型研究[J]. 石油化工高等学校学报, 2012, 25(5): 64-67.

WU Ming,ZHOU Shi-dong,WANG Lei,ZHAO Ling. Optimization Model Research in Process of Batch Transportation of Cool and Hot Crude Oil[J]. Journal of Petrochemical Universities, 2012, 25(5): 64-67.

使用本文

0
    /   /   推荐

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://journal.lnpu.edu.cn/syhg/CN/10.3969/j.issn.1006-396X.2012.05.016

               http://journal.lnpu.edu.cn/syhg/CN/Y2012/V25/I5/64



网站版权 © 2021《石油化工高等学校学报》编辑部

本系统由北京玛格泰克科技发展有限公司设计开发