The refinery industry is an energy⁃intensive industry. So the efficient recycle and utilization of light hydrocarbon gases will solve the difficulties of energy conservation and environmental protection.The adsorption and the adsorption⁃hydration method were applied to separate C2 from the simulated refinery dry mixture gas of M1(C2H6(11.55%)+C2H4(12.46%)+CH4(29.15%)+N2(27.02%)+H2(19.82%)).The collected mixture gas M2 was secondary separated by ZIF⁃8. The result showed that molar fraction of C2 was decreased to 9.90% after primary separation process using adsorption⁃hydration method.Because of the higher concentration of C2,the values of y_(C_2 ) and MC of product using the adsorption⁃hydration method were better than the adsorption method under the same initial pressure. Because the molar fraction of C2 in M2 was low, the hydrate was difficult to be formed in the system of M2, and the adsorption method with dry ZIF⁃8 was proved to be adaptive to separate the gas mixture of M2 to avoid the negative effects of water in the system of wet ZIF⁃8. Through the two⁃step separation process, the molar fraction of C2 in M1 was decreased from 24.01% to 2.90%.