特高含水期剩余油微观力学成因及孔道选择机理

doi:10.3969/j.issn.1672-6952.2018.01.008

辽宁石油化工大学学报 ›› 2018, Vol. 38 ›› Issue (1): 45-49.DOI: 10.3969/j.issn.1672-6952.2018.01.008

特高含水期剩余油微观力学成因及孔道选择机理

丁帅伟^1,2,姜汉桥¹,席怡³,李俊键¹

1.中国石油大学(北京)石油工程教育部重点实验室,北京102249;2.西北大学大陆动力学国家重点实验室, 陕西西安710069;3.中国石油长庆油田分公司苏里格气田研究中心,陕西西安710018

收稿日期:2017-10-17 修回日期:2017-11-07 出版日期:2018-02-28 发布日期:2018-02-27
作者简介::丁帅伟(1987-),男,博士,讲师,从事油藏工程与油藏数值模拟方面的研究;E-mail:shwding@126.com。
基金资助:
:中国石油大学(北京)石油工程教育部重点实验室开放研究课题;陕西省教育厅专项科研计划项目(17JK0779);国家重大专项子课题(2011ZX05030-005-05)。

The Micro Mechanical Cause and Pore Selection Mechanism of Remaining Oil at Ultra-High Water Cut Period

Ding Shuaiwei^1,2, Jiang Hanqiao¹, Xi Yi³, Li Junjian¹

1.Key Laboratory for Petroleum Engineering of the Ministry of Education, China University of Petroleum,  Beijing 102249, China; 2.State Key Laboratory for Continental Dynamics, Northwest University, Xi’an Shaanxi 710069, China; 3.The Research Center of Sulige Gas Filed, PetroChina  Changqing Oilfield Company, Xi’an Shaanxi 710018, China

Received:2017-10-17 Revised:2017-11-07 Published:2018-02-28 Online:2018-02-27

摘要/Abstract

摘要： 特高含水期剩余油多以非连续相存在,微观作用力影响明显。以特高含水期孤滴状剩余油为研究对象,对毛细管模型中油滴的微观力学成因进行分析,明确毛管力是孤滴状剩余油形成的主要微观作用力;选取双孔孔隙结构模型建立油滴运移孔道半径临界条件模型,研究剩余油滴选择毛细管孔道的机理,定量化分析结果表明, 驱动力和黏滞力对油滴通过的孔道半径最小界限值的影响较大。该结果可为分析特高含水期剩余油动用条件及提高采收率提供指导。

关键词: 特高含水期, 微观剩余油, 力学成因, 孔道选择机理

Abstract: The remaining oil exists as discontinuous phase in the ultra-high water cut period, which is greatly influenced by microscopic force. Taking the residual oil in the droplet as the object of study in the ultra-high water cut period, the micro mechanical cause of oil droplet in the capillary model is analyzed, and it is clarified that the capillary force is the main force formed by the residual oil. The model of two hole pore structure is selected to establish the critical condition model of the oil droplet transfer tunnel radius, and the mechanism of choosing the remaining oil droplet capillary channel is studied. Quantitative analysis results show that the driving force and the viscous force have a great impact on the minimum boundary value of the channel radius passing the oil droplet. The results can provide theoretical guidance for analyzing the conditions of remaining oil in ultra-high water cut period and enhancing oil recovery.

Key words: Ultra-high water cut period, Microscopic remaining oil, Mechanical cause, Pore selection mechanism

丁帅伟, 姜汉桥, 席怡, 李俊键. 特高含水期剩余油微观力学成因及孔道选择机理[J]. 辽宁石油化工大学学报, 2018, 38(1): 45-49.

Ding Shuaiwei, Jiang Hanqiao, Xi Yi, Li Junjian. The Micro Mechanical Cause and Pore Selection Mechanism of Remaining Oil at Ultra-High Water Cut Period[J]. Journal of Liaoning Petrochemical University, 2018, 38(1): 45-49.

特高含水期剩余油微观力学成因及孔道选择机理

The Micro Mechanical Cause and Pore Selection Mechanism of Remaining Oil at Ultra-High Water Cut Period

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 1

编辑推荐

Metrics