高压烧结炉快开机构的强度设计与分布

辽宁石油化工大学学报 ›› 2013, Vol. 33 ›› Issue (1): 86-89.

高压烧结炉快开机构的强度设计与分布

刘复民¹,李淑云²,谢禹钧¹,蔡永梅¹

1.辽宁石油化工大学机械工程学院,辽宁抚顺113001;2.抚顺荣盛机械制造有限公司,辽宁抚顺113001

收稿日期:2012-06-08 出版日期:2013-03-25 发布日期:2017-07-14
作者简介:刘复民(1988-),男,山东维坊市,在读硕士

Intensity Design and Distribution of the QuickOpening  Mechanism on the HighPressure Sintering Furnace

LIU Fumin¹, LI Shuyun², XIE Yujun¹, CAI Yongmei¹

1.School of Mechanical Engineering, Liaoning Shihua University, Fushun Liaoning 113001, China;  2.Fushun Rongsheng Machinery Manufacturing Company Limited, Fushun Liaoning 113001, China

Received:2012-06-08 Published:2013-03-25 Online:2017-07-14

摘要/Abstract

摘要： 应用HyperMesh软件对压力烧结炉卡箍式快开机构进行网格划分,使用ANSYS接触单元对该快开
机构做非线性接触分析,得到了在设计压力下结构的第三强度当量应力分布和变形,并分别对炉盖、炉体和卡箍进
行了分析。按照JB4732—1995《钢制压力容器———分析设计标准》对危险截面进行应力强度评定。分析结果表明,
强度满足要求。

关键词: 快开机构 , 接触分析 , 强度评定

Abstract: The grid of the quickopening clamp structure on the pressure sintering furnace was meshed by utilizing HyperMesh software, and the nonlinear contact analysis for the quickopening structure was achieved by ANSYS contact element, then the third strength equivalent stress and deformation of the quickopening structure under the designed pressure were obtained. The analyses of the furnace lid, body and clamp were accomplished. The stress intensity on the dangerous crosssection was evaluated according to JB4732—1995 [WTBX]Steel pressure vessels——analyze design standard[WTBZ]. The analysis results indicate that the intensity requirement is satisfied. 

Key words: Quickopening mechanism , Contact analysis , Intensity evaluation

刘复民,李淑云,谢禹钧,蔡永梅. 高压烧结炉快开机构的强度设计与分布[J]. 辽宁石油化工大学学报, 2013, 33(1): 86-89.

LIU Fumin, LI Shuyun, XIE Yujun, CAI Yongmei. Intensity Design and Distribution of the QuickOpening  Mechanism on the HighPressure Sintering Furnace[J]. Journal of Liaoning Petrochemical University, 2013, 33(1): 86-89.

[1]	刘哲，陈首至，张巨伟，崔双，包瑞新. 外载荷作用下压力容器接管结构有限元分析[J]. 辽宁石油化工大学学报, 2021, 41(1): 68-72.
[2]	董杰, 常佩琛, 谢禹钧. 新型虫形密封圈密封性能研究及优化[J]. 辽宁石油化工大学学报, 2020, 40(1): 66-71.
[3]	于小哲, 蔡永梅, 谢禹钧. 高压烧结炉虫形密封圈性能研究[J]. 辽宁石油化工大学学报, 2016, 36(4): 54-59.
[4]	常佩琛,蔡永梅,谢禹钧. 烧结炉端盖齿啮式连接快开结构优化[J]. 辽宁石油化工大学学报, 2015, 35(4): 44-47.