ro/E在新型并联机床实体建模上的应用

辽宁石油化工大学学报 ›› 2009, Vol. 29 ›› Issue (4): 57-59.

ro/E在新型并联机床实体建模上的应用

姜媛媛

辽宁石油化工大学机械工程学院,辽宁抚顺113001

收稿日期:2008-09-27 出版日期:2009-12-25 发布日期:2017-07-05
作者简介:姜媛媛(1981-),女,辽宁大连市,硕士
基金资助:
辽宁省教育厅科学研究计划(05L231)

Application of Pro/E in the New Entity Modeling on Parallel Machine Tools

JIANG Yuan-yuan

School of Mechanical Engineering，Liaoning University of Petroleum & Chemical Technology， Fushun Liaoning 113001，P.R.China

Received:2008-09-27 Published:2009-12-25 Online:2017-07-05

摘要/Abstract

摘要： 采用Pro/E对3_TPS_RRR并联机床进行虚拟样机实体建模,并分析该机床机构。利用Pro/E软件
对该并联机床进行了特征建模,设计出伸缩杆、驱动杆、动平台、静平台、虎克铰及双十字轴的结构。结合Pro/E的
机构约束条件对3_TPS_RRR型并联机床进行模拟装配,从而得到虚拟样机实体模型。通过Pro/E设计出的虚拟样
机缩短了机床设计和制造周期,提高了生产效率。

关键词: 并联机床 , Pro/E , 实体建模 , 虚拟样机

Abstract: 3_TPS_RRR virtual parallel machine prototype solid modeling was made and machine body were analyzed using Pro/E. The entity modeling on the three characteristics of a parallel machine tool modeling was established using Pro/E. The structure including hooker hinge, moving platform, static platform, scalable flu, the drive-structure and double-cross were designed. At last, used Pro/E body constraints to simulate 3_TPS_RRRs assembly and then get the virtual prototype solid model. Virtual prototype designed by Pro/E can cut design and manufacturing cycles, increasing productivity. 

Key words: Parallel tools , Pro/E , Solid modeling , Virtual prototype

姜媛媛. ro/E在新型并联机床实体建模上的应用[J]. 辽宁石油化工大学学报, 2009, 29(4): 57-59.

JIANG Yuan-yuan. Application of Pro/E in the New Entity Modeling on Parallel Machine Tools[J]. Journal of Liaoning Petrochemical University, 2009, 29(4): 57-59.

[1]	王述, 石成江, 张绍禹. 基于Pro/E抽油机新型减速器的运动仿真模拟[J]. 辽宁石油化工大学学报, 2017, 37(6): 44-46.
[2]	张林艳，邓子龙，张红亮，付越. 挖掘机工作装置虚拟样机的建立与动力学仿真[J]. 辽宁石油化工大学学报, 2008, 28(3): 46-49.
[3]	程仙国, 赵恒华. 基于Mat lab 对3 -TPT 并联机床的运动学仿真[J]. 辽宁石油化工大学学报, 2008, 28(1): 19-22.