Research on Crashworthiness of the Typical Thin Walled Beam

Journal of Liaoning Petrochemical University ›› 2006, Vol. 26 ›› Issue (1): 66-69.

Previous Articles Next Articles

Research on Crashworthiness of the Typical Thin Walled Beam

School of Mechanical Engineering , Liaoning University of Petroleum & Chemical Technology ,
Fushun Liaoning 113001, P .R .China

Received:2005-09-28 Published:2006-01-25 Online:2006-01-25

车辆典型薄壁梁碰撞性能的研究

高晓庆, 尤国武, 谢禹钧^＊

辽宁石油化工大学机械工程学院, 辽宁抚顺113001

作者简介:高晓庆(1980 -), 女, 江苏盐城市, 在读硕士

Abstract

Abstract:

　　 Automobile crashworthiness is mainly determined by energy absorption characteristics of thin walled beam' s components in automobile structure .In order to meet the needs of automobile crashworthiness during the design , thin walled beam' s components in automobile structure w ere taken as research objects.Aiming at collision deformation characteristics, HyperMesh and LS -DYNA were used to simulate the collision process here .The w hole process was analyzed , which thin walled beam and bumper collide with rigid wall in the forward direction.The influence of simulation and computing result was analyzed with choosing different parameters. Comparing the simulation result with that of real frontal collision , the finite element model w as verified to be correct .According to simulation result and the characteristics of energy absorbability , some cor responding improved measures were put forward o n the basis of this.

null

Key words: Crash , 　Explicit FEM , 　Nonlinear , 　Thin walled structure

摘要： 　车辆的耐撞性能主要取决于车辆结构中薄壁梁部件的吸能特性。为了在汽车的设计阶段使被设计车辆更好的满足耐撞要求, 以车辆结构中的薄壁梁部件为研究对象, 针对典型薄壁结构梁的碰撞变形特点, 采用高度非线性显式动态有限元程序Hy perMesh 和LS-DYNA 进行了碰撞的数值模拟, 分析了薄壁梁及保险杠正面撞击刚性墙的全过程以及不同参数的选取对仿真及计算结果的影响。与实车正面碰撞结果进行了对比分析, 验证了所建立的有限元模型的正确性。在此基础上, 针对仿真计算结果及薄壁构件吸能特性, 提出了一些改进措施。

关键词: 碰撞, 　显式有限元法, 　非线性, 　薄壁梁结构

GAO Xiao -qing,YOU Guo -w u,XIE Yu -jun. Research on Crashworthiness of the Typical Thin Walled Beam[J]. Journal of Liaoning Petrochemical University, 2006, 26(1): 66-69.

高晓庆, 尤国武, 谢禹钧. 车辆典型薄壁梁碰撞性能的研究[J]. 辽宁石油化工大学学报, 2006, 26(1): 66-69.

[1]	Dong Jie, Chang Peichen, Xie Yujun. Research and Optimization of the Sealing Performance of New Wormlike Sealing Ring [J]. Journal of Liaoning Petrochemical University, 2020, 40(1): 66-71.
[2]	Wang Xiantong, Cao Jiangtao, Song Lijuan, Fu Guizeng. Data Acquisition and Processing System of PSO Based on Nonlinear Reset Particle Swarm Algorithm [J]. Journal of Liaoning Petrochemical University, 2016, 36(6): 69-73.
[3]	Yu Xiaozhe, Cai Yongmei, Xie Yujun. Performance Research of Wormlike Sealing Ring in High-Pressure Sintering Furnace [J]. Journal of Liaoning Petrochemical University, 2016, 36(4): 54-59.
[4]	Sun Fengshan, Zhang Wei, Ge Linlin. The Control Strategy of Obstacle Avoidance forMobile Robot in Unknown Environment [J]. Journal of Liaoning Petrochemical University, 2016, 36(4): 69-72.
[5]	DAI Zhu-qing, ZHANG Jin-hui. PAC Coagulation for Treatment of COD Containing Industrial Wastewater [J]. Journal of Liaoning Petrochemical University, 2008, 28(3): 26-29.
[6]	SHEN Qing -bo, DING Yuan -ming . Matching Design of an Exact Model for Discrete Hamme rstein Systems [J]. Journal of Liaoning Petrochemical University, 2007, 27(4): 56-59.
[7]	YE Zhi -wei. Computing on Turbulent Flow Properties in Combustion Chambers With Dif ferent ω-Shape -Pits [J]. Journal of Liaoning Petrochemical University, 2006, 26(2): 59-62.

Research on Crashworthiness of the Typical Thin Walled Beam

车辆典型薄壁梁碰撞性能的研究

PDF

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 7

Recommended Articles

Metrics