Research Status of Grinding Technology of Nickel⁃Based Superalloy

doi:10.12422/j.issn.1672-6952.2023.03.010

Abstract

Abstract:

Nickel?based superalloys, as typical difficult?to?machine materials, are widely used in aerospace engines, chemicals, ships, and other fields. To meet the special working conditions requirements of the aero?engines, and further improve the surface machining quality and processing efficiency, relevant researchers have carried out many theoretical studies and process explorations. The development of nickel?based single crystal superalloys and polycrystalline superalloys, and their material properties were firstly reviewed. Then the main research results of domestic and overseas scholars on the grinding removal mechanism, grinding surface integrity, and process characteristics of nickel?based superalloys were summarized, and their development trends are prospected.

Key words: Nickel?based superalloy, Grinding, Removal mechanism, Surface integrity, Process characteristics

摘要：

镍基高温合金广泛应用于航空发动机、化工、船舶等领域，是一种典型的难加工材料。为了满足航空发动机特殊工况要求，进一步提高其表面加工质量和加工效率，研究人员开展了诸多理论研究和工艺探索。在概述镍基单晶高温合金和镍基多晶高温合金的发展及其材料特性的基础上，总结了国内外学者在镍基高温合金磨削去除机理、表面完整性、工艺特性等方面的主要研究成果，并对其发展趋势进行了展望。

关键词: 镍基高温合金, 磨削, 去除机理, 表面完整性, 工艺特性

CLC Number:

TQ171.5

Ming Cai, Tao Zhu, Xingjun Gao, Jinqi Bao. Research Status of Grinding Technology of Nickel⁃Based Superalloy[J]. Journal of Liaoning Petrochemical University, 2023, 43(3): 60-68.

蔡明, 朱涛, 高兴军, 鲍金奇. 镍基高温合金磨削加工技术研究现状[J]. 辽宁石油化工大学学报, 2023, 43(3): 60-68.

Figures/Tables 4

References 55

1	Ezugwu E O.Key improvements in the machining of difficult⁃to⁃cut aerospace superalloys［J］.International Journal of Machine Tools and Manufacture，2005，45（12⁃13）：1353⁃1367.
2	Zhu T，Cai M，Gong Y D，et al.Study on chip formation in grinding of nickel‑based polycrystalline superalloy GH4169［J］. The International Journal of Advanced Manufacturing Technology，2022，121：1135⁃1148.
3	丁文锋，苗情，李本凯，等.面向航空发动机的镍基合金磨削技术研究进展［J］.机械工程学报，2019，55（1）：189⁃215.
4	Zhang Z Y，Du Y F，Wang B，et al.Nanoscale wear layers on silicon wafers induced by mechanical chemical grinding［J］. Tribology Letters，2017，65（4）：1⁃13.
5	《中国航空材料手册》编辑委员会.中国航空材料手册［M］.北京：中国标准出版社，2002.
6	张健，王莉，王栋，等.镍基单晶高温合金的研发进展［J］.金属学报，2019，55（9）：1077⁃1094.
7	佚名.高温合金强化工艺［J］.金属热处理，2019，44（6）：179.
8	高玉魁.喷丸强化对DD6单晶高温合金高温旋转弯曲疲劳性能的影响［J］.金属热处理，2009，34（8）：60⁃61.
9	孙晓峰，金涛，周亦胄，等.镍基单晶高温合金研究进展［J］.中国材料进展，2012，31（12）：1⁃11.
10	Gong Y D，Zhou Y G，Wen X L，et al.Experimental study on micro⁃grinding force and subsurface microstructure of nickel⁃based single crystal superalloy in micro grinding［J］.Journal of Mechanical Science and Technology，2017，31（7）：3397⁃3410.
11	李剑荣，虞吉林.随机晶界分布对铝多晶材料晶间破坏行为的影响［J］.固体力学学报，2004，25（3）：335⁃338.
12	任敬心，康仁科，王西彬.难加工材料磨削技术［M］.北京：电子工业出版社，2011.
13	任敬心，华定安.磨削原理［M］.北京：电子工业出版社，2011.
14	程泽.单颗磨粒高速磨削镍基高温合金机理研究［D］.南京：南京航空航天大学，2011.
15	田霖，傅玉灿，杨路，等.基于速度效应的高温合金高速超高速磨削成屑过程及磨削力研究［J］.机械工程学报，2013，49（9）：169⁃177.
16	Tian L，Fu Y C，Xu J H，et al.The influence of speed on material removal mechanism in high speed grinding with single grit［J］.International Journal of Machine Tools and Manufacture，2015，89：192⁃201.
17	夏江，丁文锋，徐九华，等.镍基高温合金高速超高速磨削成屑过程的三维仿真研究［J］.金刚石与磨料磨具工程，2020，40（6）：58⁃69.
18	Chen Z Z，Tian L，Fu Y C，et al.Chip formation of nickel⁃based superalloy in high speed grinding with single diamond grit［J］.International Journal of Abrasive Technology，2012，5（2）：93⁃106.
19	Sun Y，Su Z P，Gong Y D，et al.Analytical and experimental study on micro⁃grinding surface⁃generated mechanism of DD5 single⁃crystal superalloy using micro⁃diamond pencil grinding tool［J］.Archives of Civil and Mechanical Engineering，2021，21（1）：1⁃22.
20	Gu Y L，Nan L H，Du B C，et al.Towards the understanding of creep⁃feed deep grinding of DD6 nickel⁃based single⁃crystal superalloy［J］.International Journal of Advanced Manufacturing Technology，2019，100（2）：445⁃455.
21	Ren J，Hao M R，Liang G X，et al.Study of subsurface damage of monocrystalline nickel in nanometric grinding with spherical abrasive grain［J］.Physica B：Condensed Matter，2019，560：60⁃66.
22	Hao Z P，Lou Z Z，Fan Y H.Study on the evolution mechanism of subsurface defects in nickel⁃based single crystal alloy during atomic and close⁃to⁃atomic scale cutting［J］.Journal of Manufacturing Processes，2021，68（3）：14⁃33.
23	李强，郭辰光，赵丽娟，等.具有晶体学各向异性特征的DD5镍基单晶高温合金铣削力建模［J］.中国机械工程，2021，32（6）：734⁃740.
24	胡赓祥.材料科学基础［M］.上海：上海交通大学出版社，2003.
25	孙杨.单晶材料微尺度磨削工艺性能实验研究［D］.沈阳：东北大学，2015.
26	Tso P L.Study on the grinding of Inconel 718［J］.Journal of Materials Processing Technology，1995，55：421⁃426.
27	Miao Q，Ding W F，Kuang W J，et al.Comparison on grindability and surface integrity in creep feed grinding of GH4169， K403，DZ408 and DD6 nickel⁃based superalloys［J］.Journal of Manufacturing Processes，2020，49：175⁃186.
28	Wang Y G，Li C H，Zhang Y B，et al.Experimental evaluation of the lubrication properties of the wheel/workpiece interface in MQL grinding using different types of vegetable oils［J］.Journal of Cleaner Production，2016，127：487⁃499.
29	Sirin S，Sarikaya M，Yildirim C V，et al.Machinability performance of nickel alloy X⁃750 with SiAlON ceramic cutting tool under dry，MQL and HBN mixed nanofluid⁃MQL［J］.Tribology International，2021，153：106673.
30	Pereira O，Celaya A，Urbikaín G，et al.CO₂ cryogenic milling of Inconel 718：Cutting forces and tool wear［J］.Journal of Materials Research and Technology，2020，9（4）：8459⁃8468.
31	Dogra M，Sharma V S，Dureja J S，et al.Environment⁃friendly technological advancements to enhance the sustainability in surface grinding——A review［J］.Journal of Cleaner Production，2018，197：218⁃231.
32	Li S，Wu Y，Fujimoto M，et al.Improving the working surface condition of electroplated cubic boron nitride grinding quill in surface grinding of Inconel 718 by the assistance of ultrasonic vibration［J］.Journal of Manufacturing Science and Engineering，2016，138（7）：1⁃8.
33	蔡明，巩亚东，冯耀利，等.镍基高温合金磨削表面工艺性能试验研究［J］.东北大学学报（自然科学版），2019，40（2）： 234⁃238.
34	Zhao Z C，Fu Y C，Xu J H，et al.Behavior and quantitative characterization of CBN wheel wear in high⁃speed grinding of nickel⁃based superalloy［J］.The International Journal of Advanced Manufacturing Technology，2016，87（9）：3545⁃3555.
35	Zhou Y G，Gong Y D，Zhu Z X，et al.Modelling and optimisation of surface roughness from microgrinding of nickel⁃based single crystal superalloy using the response surface methodology and genetic algorithm［J］.The International Journal of Advanced Manufacturing Technology，2016，85（9）：2607⁃2622.
36	周云光.镍基单晶高温合金微磨削工艺理论与关键技术研究［D］.沈阳：东北大学，2017.
37	Dai C W，Ding W F，Xu J H，et al.Influence of grain wear on material removal behavior during grinding nickel⁃based superalloy with a single diamond grain［J］.International Journal of Machine Tools and Manufacture，2017，113：49⁃58.
38	Liu Q，Chen X，Gindy N.Assessment of Al₂O₃ and superabrasive wheels in nickel⁃based alloy grinding［J］.International Journal of Advanced Manufacturing Technology，2007，33（9⁃10）：940⁃951.
39	蔡明，巩亚东，屈硕硕，等.镍基单晶高温合金磨削表面质量及亚表面微观组织试验［J］.东北大学学报（自然科学版），2019，40（3）：386⁃391.
40	Ding W F，Dai C W，Yu T Y，et al.Grinding performance of textured monolayer CBN wheels：Undeformed chip thickness nonuniformity modeling and ground surface topography prediction［J］.International Journal of Machine Tools and Manufacture，2017，122：66⁃80.
41	巩亚东，苏志朋，孙瑶，等.镍基单晶高温合金微磨削形貌仿真及实验研究［J］.东北大学学报（自然科学版），2020，41（7）：949⁃954.
42	Cai M，Gong Y D，Sun Y，et al.Experimental study on grinding surface properties of nickel⁃based single crystal superalloy DD5［J］.The International Journal of Advanced Manufacturing Technology，2019，101（1）：71⁃85.
43	陈珍珍.多孔复合结合剂立方氮化硼砂轮高效磨削研究［D］.南京：南京航空航天大学，2014.
44	Cai M， Zhu T， Gao X J， et al.Study on machining performance in grinding of Ni‑base single crystal superalloy DD5［J］. The International Journal of Advanced Manufacturing Technology，2022，120：7657⁃7671.
45	Nouioua M，Yallese M A，Khettabi R，et al.Comparative assessment of cooling conditions， including MQL technology on machining factors in an environmentally friendly approach［J］.The International Journal of Advanced Manufacturing Technology，2017，91（9）：3079⁃3094.
46	Ding W F，Linke B，Zhu Y J，et al.Review on monolayer CBN superabrasive wheels for grinding metallic materials［J］. Chinese Journal of Aeronautics，2017，30（1）：109⁃134.
47	张修铭，刘莉娟，修世超，等.基于热⁃力耦合磨削表层残余应力的仿真分析［J］.东北大学学报（自然科学版），2014，35（12）：1758⁃1762.
48	潘宗星，宋俊凯，高玉魁.基于激光超声的GH4169高温合金残余应力检测［J］.力学季刊，2021，42（1）：98⁃107.
49	梁志强，陈一帆，栾晓圣，等.超高强度钢强力滚压残余应力仿真与试验研究［J］.表面技术，2021，50（1）：413⁃421.
50	华杨.高温合金GH4169车⁃滚组合加工表面残余应力及疲劳寿命研究［D］.济南：山东大学，2020.
51	Wang P Z，He Z S，Zhang Y X，et al.Control of grinding surface residual stress of Inconel 718［J］.Procedia Engineering，2017，174：504⁃511.
52	李峰，李学崑，融亦鸣.强化感应加热辅助磨削Inconel718的残余应力主动调控［J］.机械工程学报，2018，54（3）：216⁃226.
53	Li F，Li X K，Wang T，et al.In⁃process residual stresses regulation during grinding through induction heating with magnetic flux concentrator［J］.International Journal of Mechanical Sciences，2020，172：105393.
54	Kuang W J，Miao Q，Ding W F，et al.Residual stresses of turbine blade root produced by creep⁃feed profile grinding：Three⁃dimensional simulation based on workpiece⁃grain interaction and experimental verification［J］.Journal of Manufacturing Processes，2021，62：67⁃79.
55	史若彤，邓子龙，高兴军，等.基于Deform⁃3D的镍基高温合金残余应力仿真分析［J］.辽宁石油化工大学学报，2017，37（4）：49⁃52.

[1]	Jiaqi Zheng, Changfu Liu, Xiaodan Zhu, Yu Wang, Shuo Zhang. Research Progress of Grinding Technology with Minimum Quantity Lubrication [J]. Journal of Liaoning Petrochemical University, 2023, 43(4): 84-91.
[2]	Dong He， Zhu Xiangzhe， Chen Li. Analysis of Vibration Characteristic of Spindl⁃Bearing System of High Speed Grinding Machine [J]. Journal of Liaoning Petrochemical University, 2021, 41(1): 56-60.
[3]	Zhao Henghua， Mu Hongping， Zhao Xueyang. Modification of the Grinding Force in Mesoscopic and Macroscopic [J]. Journal of Liaoning Petrochemical University, 2016, 36(5): 47-50.
[4]	Luo Kuanyong, Han Dongyun, Cao Zubin, Song Guanlong, Li Sichao, Sun Shuying. Separation of Yumen Oil Sands by Wet-Grinding and Washing Treatment [J]. Journal of Liaoning Petrochemical University, 2016, 36(4): 5-7.
[5]	Ai Dong, Zhao Rongxiang, Li Xiuping, Xu Zhude. Preparation of CdS/Ag2S Composite Photocatalyst and Its Photocatalytic Performance [J]. Journal of Liaoning Petrochemical University, 2015, 35(4): 1-4,15.
[6]	FENG Bao -fu,MA Chun -rong. Surface Hardness Af ter Grinding for Hardened Bearing Steel [J]. Journal of Liaoning Petrochemical University, 2005, 25(2): 42-45.