钻井油气层测试器系统的强度可靠性计算

辽宁石油化工大学学报 ›› 2006, Vol. 26 ›› Issue (1): 52-54.

钻井油气层测试器系统的强度可靠性计算

赵　斌, 王茂廷

辽宁石油化工大学机械工程学院, 辽宁抚顺113001

收稿日期:2005-09-20 出版日期:2006-01-25 发布日期:2006-01-25
作者简介:赵斌(1978 -), 男, 辽宁抚顺市, 硕士。

Strength Reliability Calculation for Formation Center Tester System

School of Mechanical Engineering , Liaoning University of Petroleum & Chemical Technology ,
Fushun Liaoning 113001, P .R .China

Received:2005-09-20 Published:2006-01-25 Online:2006-01-25

摘要/Abstract

摘要： 　钻井油气层测试器是由液压动力短节、双PACKER 短节、反向注入短节、数字泵抽短节、传感器短节和取样筒短节组成的。这6 个短节是串联而成的。由于其工作环境恶劣, 所以对其进行可靠性分析是十分必要的。采用K-OUT -OF -N 模型来计算钻井中途油气层测试器的可靠度。利用Monte -Car lo 法求出每个短节的可靠度。应用概率理论推导出钻井油气层测试器系统的可靠度精确计算公式。利用独立的失效概率为q 的Ber noulli 试验序列、概率公式和递增凸函数的性质推导出了钻井油气层测试器的可靠度的近似计算公式。利用精确计算公式和近似计算公式分别计算钻井油气层测试器的可靠度, 结果分别为0.918 和0 .915 , 计算结果表明钻井中途油气层测试器有比较高可靠性。

null

关键词: 　钻井油气层测试器, 　可靠性, 　概率理论

Abstract:

　Formation center tester(FCT)is made up of hydraulic power joint, double PACKER joint , opposing infuse joint, numeric pump exhausting joint , sensor joint and sampling tube joint .The six joints are in series .Because its working environment hard , it is necessary to have reliability analysis for it .The reliable of FC T was calculated by using K-OUT-OF-N model, and the reliable of each joint w as worked out by using Monte-Carlo method .The narrow casting formula of reliable on FCT test system was calculated based on probability theory .The approximation calculus formula of reliable on FCT was calculated by using abate probability being q Bernoulli test sequence , probability formula and property of increasing convex function.The reliable of FCT was calculated respectively by using narrow casting formula and approximation calculus formula .The results are 0 .918 and 0 .915 .Calculating results show that FCT has high reliability

Key words: 　FCT, 　Reliability , 　Probability theory

赵　斌, 王茂廷. 钻井油气层测试器系统的强度可靠性计算[J]. 辽宁石油化工大学学报, 2006, 26(1): 52-54.

ZHAO Bin,WANG Mao -ting. Strength Reliability Calculation for Formation Center Tester System[J]. Journal of Liaoning Petrochemical University, 2006, 26(1): 52-54.

[1]	赵志博，多依丽，王博，孙铁，刘明，高涵. 基于GO法与DBN的冗余系统可靠性分析[J]. 辽宁石油化工大学学报, 2020, 40(5): 66-72.
[2]	陈印1,刘宝玉1,陈琳琳2,郝晶1,李卫卫1,马洪建1. 集输管网失效的故障树分析[J]. 辽宁石油化工大学学报, 2014, 34(3): 58-61.
[3]	宋士祥,吴明,刘珂,张国军,马跃,范开锋. 基于雷灢菲法的油气管道可靠性分析[J]. 辽宁石油化工大学学报, 2013, 33(2): 39-42.
[4]	宋士祥,吴明,刘珂,张国军,马跃,范开锋. 基于雷-菲法的油气管道可靠性分析[J]. 辽宁石油化工大学学报, 2013, 33(2): 43-47.
[5]	胡宗柳，吴明，刘勇峰，姜东方，王建. 基于有限元法的球罐强度可靠性分析[J]. 辽宁石油化工大学学报, 2011, 31(4): 26-28.
[6]	林国庆,王茂廷,林猛. 汽车发动机连杆在拉压工况下的可靠性分析[J]. 辽宁石油化工大学学报, 2011, 31(3): 50-53.
[7]	王莉,王新刚. 机械零部件的动态可靠性稳健优化设计[J]. 辽宁石油化工大学学报, 2010, 30(2): 32-36.
[8]	魏晓丽,侯景臣,宋岱才. 威布尔分布场合无失效数据的可靠性验证试验[J]. 辽宁石油化工大学学报, 2010, 30(2): 65-67.
[9]	高慧,周长茂,孙铁,张素香,孙壮. 气浮机叶轮裂纹扩展的可靠性分析[J]. 辽宁石油化工大学学报, 2009, 29(1): 54-56.
[10]	孙春一. 加氢反应器模糊可靠性优化设计[J]. 辽宁石油化工大学学报, 2007, 27(4): 41-44.
[11]	陈振坤, 王茂廷,王　莲. 海底管线管跨段模糊动力可靠性分析[J]. 辽宁石油化工大学学报, 2005, 25(3): 61-64.