基于Pro/E抽油机新型减速器的运动仿真模拟

doi:10.3969/j.issn.1672-6952.2017.06.009

辽宁石油化工大学学报 ›› 2017, Vol. 37 ›› Issue (6): 44-46.DOI: 10.3969/j.issn.1672-6952.2017.06.009

基于Pro/E抽油机新型减速器的运动仿真模拟

王述¹,石成江¹,张绍禹²

1.辽宁石油化工大学机械工程学院,辽宁抚顺113001;2.抚顺石化公司合成洗涤剂厂,辽宁抚顺113004

收稿日期:2016-11-01 修回日期:2016-11-28 出版日期:2017-12-20 发布日期:2018-02-27
通讯作者: 石成江(1962-),男,博士,教授,从事机械设计制造方面的研究;E-mail:shicj-2008@163.com。
作者简介:王述(1987-),男,硕士研究生,从事机械设计方面的研究;E-mail:wskozzz@sina.com。

Motion Simulation of a New Type Reducer Based on Pro/E Oil Pumping Unit

Wang Shu¹， Shi Chengjiang¹， Zhang Shaoyu²

1.School of Mechanical Engineering，Liaoning Shihua University，Fushun Liaoning 113001，China； 2.Synthetic Detergent Factory，Fushun Petrochemical Company，Fushun Liaoning 113004，China

Received:2016-11-01 Revised:2016-11-28 Published:2017-12-20 Online:2018-02-27

摘要/Abstract

摘要： 减速器作为重要的传动装置,在多个领域都得到了非常广泛的应用。主要介绍了油田抽油机专用减速器的一种新型设计,并应用Pro/E软件进行了建模、装配、模拟分析。结果表明,通过位置仿真能得到齿轮运转的干涉情况,并能直观地反映减速器内部齿轮的运转情况;通过运动学仿真能验证传动比;通过动态仿真能得到机构连接受力情况,并通过受力分析得到机构的振动情况。由此可以看出,直接应用Pro/E进行模拟,可大大提高设计效率。

关键词: Pro/E, 新型减速器, 装配, 仿真模拟

Abstract: Reducer as an important transmission, there is a very wide range of applications in many areas. A new design of reducer for oil pumping unit in oil field was introduced, and the modeling, assembly and simulation analysis of Pro/E software was used. The interference of gear running was obtained by position simulation, and the operation condition of internal gear of reducer was directly reflected. The drive ratio was verified through kinematics simulation| through dynamic simulation, the force of the mechanism was obtained, and the vibration condition of the mechanism was obtained by the force analysis. Direct application of Pro/E simulation could greatly improve the design efficiency.

Key words: Pro/E, Newly reducer, Assembly, Analog simulation

王述, 石成江, 张绍禹. 基于Pro/E抽油机新型减速器的运动仿真模拟[J]. 辽宁石油化工大学学报, 2017, 37(6): 44-46.

Wang Shu, Shi Chengjiang, Zhang Shaoyu. Motion Simulation of a New Type Reducer Based on Pro/E Oil Pumping Unit[J]. Journal of Liaoning Petrochemical University, 2017, 37(6): 44-46.

[1]	孙占炜，朱向哲. T形多分支管气液两相分流特性的数值模拟[J]. 辽宁石油化工大学学报, 2021, 41(2): 65-72.
[2]	蓝晓民,王盛智. AutoCAD中二维图形消隐的一种新方法[J]. 辽宁石油化工大学学报, 2011, 31(3): 70-73.
[3]	蓝晓民. CAD中参数化二维装配消隐的一种新方法[J]. 辽宁石油化工大学学报, 2011, 31(1): 58-60.
[4]	蓝晓民. 应用扩展实体数据开发明细表自动生成系统[J]. 辽宁石油化工大学学报, 2010, 30(3): 75-78.
[5]	姜媛媛. ro/E在新型并联机床实体建模上的应用[J]. 辽宁石油化工大学学报, 2009, 29(4): 57-59.

基于Pro/E抽油机新型减速器的运动仿真模拟

Motion Simulation of a New Type Reducer Based on Pro/E Oil Pumping Unit

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics