辽宁石油化工大学学报

辽宁石油化工大学学报 ›› 2023, Vol. 43 ›› Issue (4): 8-13.DOI: 10.12422/j.issn.1672-6952.2023.04.002

• 化学与化学工程 • 上一篇    下一篇

改性乙烯焦油沥青的制备及表征分析

张硕1(), 付怀佳2, 韩冬云1(), 乔海燕1, 石薇薇1, 邓小丹3   

  1. 1.辽宁石油化工大学 石油化工学院,辽宁 抚顺 113001
    2.淄博齐翔腾达化工股份有限公司,山东 淄博 255438
    3.中国昆仑工程有限公司 沈阳分公司,辽宁 沈阳 110015
  • 收稿日期:2023-03-03 修回日期:2023-03-23 出版日期:2023-08-25 发布日期:2023-09-04
  • 通讯作者: 韩冬云
  • 作者简介:张硕(1998⁃),男,硕士研究生,从事清洁燃料生产方面的研究;E⁃mail:dashuo1002@163.com
  • 基金资助:
    辽宁省教育厅科学研究项目(LJKZ0409)

Preparation and Characterization of Modified Ethylene Tar Pitch

Shuo Zhang1(), Huaijia Fu2, Dongyun Han1(), Haiyan Qiao1, Weiwei Shi1, Xiaodan Deng3   

  1. 1.School of Petrochemical Technology,Liaoning Petrochemical University,Fushun Liaoning 113001,China
    2.Zibo Qixiang Tengda Chemical Co. ,Ltd. ,Zibo Shandong 255438,China
    3.China Kunlun Contracting & Engineering Corporation Shenyang Company,Shenyang Liaoning 110015,China
  • Received:2023-03-03 Revised:2023-03-23 Published:2023-08-25 Online:2023-09-04
  • Contact: Dongyun Han

摘要:

以乙烯焦油沥青(ETP)为原料,对其进行热聚合改性处理,探讨了聚合反应温度、聚合反应时间、催化剂及交联剂质量分数对改性乙烯焦油沥青(METP)的组成、性质及收率的影响,并结合元素分析、FT?IR、XRD、Raman、热重分析对ETP及METP进行研究,得到了最佳反应条件:聚合反应温度为370 ℃,聚合反应时间为6 h,催化剂和交联剂质量分数为1.50%。在此条件下得到的METP的软化点(SP)为182 ℃,结焦值(CV)为57.66%,β树脂质量分数为42.26%,喹啉不溶物(QI)质量分数为0.87%,符合高碳材料前驱体的要求;METP收率为73.26%。

关键词: 乙烯焦油沥青, 热聚合, 改性乙烯焦油沥青, β树脂, 收率

Abstract:

The effects of polymerization reaction temperature, polymerization reaction time, catalyst and crosslinker addition on the properties of modified ethylene tar pitch (METP) were investigated, and the optimal reaction conditions were obtained by combining elemental analysis, FT?IR, XRD, Raman and thermogravimetric analysis on ETP and METP: The polymerization reaction temperature was 370 ℃, and the polymerization reaction time was 6 h, besides the addition of catalyst and crosslinker was 1.50%. The softening point (SP) of METP obtained under these conditions was 182 ℃, the coking value (CV) was 57.66%, the β resin was 42.26%, and the quinoline insoluble matter (QI) was 0.87%, which met the requirements of high carbon material precursors; The yieid of METP was 73.26%.

Key words: ETP, Thermal polymerization, METP, β resin, Yield

中图分类号: 

引用本文

张硕, 付怀佳, 韩冬云, 乔海燕, 石薇薇, 邓小丹. 改性乙烯焦油沥青的制备及表征分析[J]. 辽宁石油化工大学学报, 2023, 43(4): 8-13.

Shuo Zhang, Huaijia Fu, Dongyun Han, Haiyan Qiao, Weiwei Shi, Xiaodan Deng. Preparation and Characterization of Modified Ethylene Tar Pitch[J]. Journal of Liaoning Petrochemical University, 2023, 43(4): 8-13.

使用本文

0
    /   /   推荐

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://journal.lnpu.edu.cn/CN/10.12422/j.issn.1672-6952.2023.04.002

               http://journal.lnpu.edu.cn/CN/Y2023/V43/I4/8