石油化工高等学校学报

石油化工高等学校学报 ›› 2018, Vol. 31 ›› Issue (01): 23-29.DOI: :10.3969/j.issn.1006-396X.2018.01.005

• 石油化工 • 上一篇    下一篇

不同g-C3N4/WO3 异质结材料的制备及其光催化性能研究

梁红玉1,2,李建中1,田彦文1,邹 赫2,胡绍争2   

  1. 1.东北大学 冶金学院,辽宁 沈阳 110819; 2.辽宁石油化工大学 化学化工与环境学部,辽宁 抚顺 113001
  • 收稿日期:2017-11-23 修回日期:2017-12-25 出版日期:2018-02-28 发布日期:2018-02-27
  • 作者简介::梁红玉(1969-),女,博士研究生,副教授,从事层状材料(水滑石、石墨型氮化碳等)在绿色能源及环境工程中的应用;Email: lianghongyu163@163.com。
  • 基金资助:
    国家自然科学基金项目资助(No.51374053)。

Different Preparation and Photocatalytic Performance of g-C3N4/WO Heterojunctions

Liang Hongyu1,2, Li Jianzhong1, Tian Yanwen1, Zou He2, Hu Shaozheng2   

  1. 1. School of Metallurgy, Northeastern University, Shenyang Liaoning 110819, China; 2. College of Chemistry, Chemical Engineering and Environmental Engineering, Liaoning Shihua University,Fushun Liaoning 113001,China
  • Received:2017-11-23 Revised:2017-12-25 Published:2018-02-28 Online:2018-02-27

摘要: 分别采用超声分散法、水热法和焙烧法制备了g-C3N4/WO3 异质结催化剂,采用XRD、UV-Vis、氮气吸附、XPS、荧光光谱、EIS(阻抗谱)等多种手段对制备的催化剂进行表征。结果表明,制备方法对异质结组分间的结合强弱有显著影响,导致电子空穴分离效率迥异。模拟可见光下降解罗丹明B(RhB)和分解水制氢气作为探针反应来考察产品光催化性能,可得出三种异质结产品催化性能全部优于单个组分,而且水热法制备的产品催化性能最佳。

关键词: 石墨相氮化碳, 三氧化钨, 异质结材料, 光催化

Abstract: Three different methods (ultrasonic dispersion, hydrothermal method and calcination) were used to prepared g-C3N4/WO heterojunctions. Obtained catalysts were characterized with X-ray diffraction (XRD), UVvis spectroscopy, nitrogen adsorption, X-ray photoelectron spectroscopy (XPS), photoluminescence (PL), and Electrochemical impedance spectroscopy (EIS). The results showed that the interaction between g-C3N4/WO and WO3 was obviously affected by the preparation methods, resulting in the significant difference in separation rate of photogenerated electrons and holes. The photocatalytic performances were detected in photocatalytic Rhodamine B (RhB) degradation under simulated visible light. The results indicated that activities of g-C3N4/WO heterojunction composites were evidently higher than that of single g-C3N4/WO or WO3 semiconductor, and the heterojunction semiconductor prepared by the hydrothermal method showed the highest photocatalytic activity.

Key words: g-C3N4, WO3, Heterojunction composites, Photocataly

引用本文

梁红玉,李建中,田彦文,邹 赫,胡绍争. 不同g-C3N4/WO3 异质结材料的制备及其光催化性能研究[J]. 石油化工高等学校学报, 2018, 31(01): 23-29.

Liang Hongyu, Li Jianzhong, Tian Yanwen, Zou He, Hu Shaozheng. Different Preparation and Photocatalytic Performance of g-C3N4/WO Heterojunctions[J]. Journal of Petrochemical Universities, 2018, 31(01): 23-29.

使用本文