石油化工高等学校学报

石油化工高等学校学报 ›› 2011, Vol. 24 ›› Issue (6): 39-41.DOI: 10.3696/j.issn.1006-396X.2011.06.010

• 石油化工 • 上一篇    下一篇

热分级技术在BOPP专用料评价中的应用

崔文峰,王海燕,张援越   

  1. 中国石油兰州石化公司质检部
  • 收稿日期:2011-11-23 出版日期:2011-12-25 发布日期:2011-12-25
  • 作者简介:崔文峰(1964-),男,甘肃通谓县,高级工程师,博士
  • 基金资助:
    中国石油集团科技创新项目(0904A07-11)

Application of Thermal Fractionation Technology in the Evaluation of BOPP Special Materials

  1. PetroChina Lanzhou Petrochemical Company, Lanzhou Gansu 730060, P.R.China
  • Received:2011-11-23 Published:2011-12-25 Online:2011-12-25

摘要: 使用连续自成核退火法对BOPP专用料的分子链结构进行了表征,在BOPP材料的结晶行为与分子结构之间建立了对应关系。研究结果表明,兰州石化所产牌号为T38F的BOPP树脂的厚晶片与薄晶片的比值Ipeak1/Ipeak2在0.2~0.4,晶片厚度分布系数在1.052~1.071。该方法具有设备简单、操作简便、样品量少、耗时短等优点,可用于BOPP专用料生产中对分子结构的实时监控。

关键词: 热分级 , 连续自成核退火 , 差示扫描量热 , 聚丙烯

Abstract: The molecular chain structure of BOPP special materials was characterized by successive self-nucleation and annealing (SSA) thermal analysis using DSC, and co-relation between crystallization behavior and molecular structure was established. The research results show that the value of Ipeak1/Ipeak2 in BOPP resin produced by Lanzhou petrochemical company ranges from 0.2 to 0.4, and the parameters of the distribution ranges from 1.052 to 1.071. This method have the advantages of time-saving and cost-saving, and which can be used in real-time monitoring of molecular structure.

Key words: Thermal segregation, Successive self-nucleation and annealing thermal analysis, Differential scanning calorimetry (DSC), Polypropylene(PP)

引用本文

崔文峰,王海燕,张援越. 热分级技术在BOPP专用料评价中的应用[J]. 石油化工高等学校学报, 2011, 24(6): 39-41.

CUI Wen-feng, WANG Hai-yan, ZHANG Yuan-yue. Application of Thermal Fractionation Technology in the Evaluation of BOPP Special Materials[J]. Journal of Petrochemical Universities, 2011, 24(6): 39-41.

使用本文