硅基固体胺吸附剂捕集空气中CO2的研究进展

doi:10.3969/j.issn.1006-396X.2022.04.001

石油化工高等学校学报 ›› 2022, Vol. 35 ›› Issue (4): 1-9.DOI: 10.3969/j.issn.1006-396X.2022.04.001

硅基固体胺吸附剂捕集空气中CO₂的研究进展

荣振洋¹^,²(), 祁路明¹^,², 刘清¹^,²(), 费兆阳¹^,²(), 崔咪芬¹^,², 乔旭¹^,²^,³

^1.南京工业大学化工学院，江苏南京 210009
^2.南京工业大学材料化学工程国家重点实验室，江苏南京 210009
^3.江苏省先进材料协同创新中心，江苏南京 210009

收稿日期:2022-06-14 修回日期:2022-08-22 出版日期:2022-08-25 发布日期:2022-09-27
通讯作者: 刘清,费兆阳
作者简介:荣振洋（1998⁃），男，硕士研究生，从事CO2捕集方面的研究；E⁃mail：202161204271@njtech.edu.cn。
基金资助:
国家自然科学青年基金项目(21606130);国家重点研发计划项目(2019YFC1905804);江苏省重点研发计划项目(BE2019735)

Research Progress in Silicon⁃Based Solid Amine Adsorbents for CO₂ Capture

Zhenyang Rong¹^,²(), Luming Qi¹^,², Qing Liu¹^,²(), Zhaoyang Fei¹^,²(), Mifen Cui¹^,², Xu Qiao¹^,²^,³

^1.College of Chemical Engineering，Nanjing Tech University，Nanjing Jiangsu 210009，China
^2.State Key Laboratory of Materials?Oriented Chemical Engineering，Nanjing Tech University，Nanjing Jiangsu 210009，China
^3.Jiangsu National Synergetic Innovation Center for Advanced Materials，Nanjing Tech University，Nanjing Jiangsu 210009

Received:2022-06-14 Revised:2022-08-22 Published:2022-08-25 Online:2022-09-27
Contact: Qing Liu, Zhaoyang Fei

摘要/Abstract

摘要：

人类活动导致的CO₂过量排放，是造成全球气候变暖的主要原因，因此亟需一种能够有效控制CO₂浓度增长的方法。直接空气捕获技术是目前唯一能够大规模实现碳排放负增长的技术。固体胺吸附剂，特别是硅载体固体胺吸附剂，因其具有高吸附能力、抗腐蚀、低能耗等优点，被广泛研究并用于环境空气中捕获CO₂。将硅基固体胺吸附剂按照负载方式进行分类，并归纳了不同硅基载体对吸附剂性能的影响；提出粉末状固体胺吸附剂在工业应用中遇到的难题，整理并分析了固体胺吸附剂当前的成型方法；指出了开发高吸附量、高稳定性的成型固体胺吸附剂是CO₂吸附剂工业化的未来趋势。

关键词: CO₂捕集, 吸附剂, 载体, 有机胺, 成型

Abstract:

Excessive CO₂ emission caused by a large number of human activities is the main cause of global warming,so a method to effectively control the increase in CO₂ concentration is urgently needed.Currently,direct air capture is the only technology capable of achieving negative growth of carbon emissions on a large scale.Solid amine adsorbents,especially silicon?based ones, have been widely studied and used to capture CO₂ from ambient air due to their advantages of high adsorption capacity,corrosion resistance,and low energy consumption.In this paper,silicon?based solid amine adsorbents were classified according to the mode of loading,and the influence of different silicon?based supports on the adsorbent performance was summarized.At the same time,the problems encountered in the industrial application of powdered solid amine adsorbents were put forward,and the current forming methods of solid amine adsorbents were sorted out.Finally,it is pointed out that the development of formed solid amine adsorbents with high adsorption capacity and high stability is the future trend of CO₂ adsorbent industrialization.

Key words: CO₂ capture, Adsorbents, Support, Organic amine, Pelletization

中图分类号:

TQ116.3

荣振洋, 祁路明, 刘清, 费兆阳, 崔咪芬, 乔旭. 硅基固体胺吸附剂捕集空气中CO₂的研究进展[J]. 石油化工高等学校学报, 2022, 35(4): 1-9.

Zhenyang Rong, Luming Qi, Qing Liu, Zhaoyang Fei, Mifen Cui, Xu Qiao. Research Progress in Silicon⁃Based Solid Amine Adsorbents for CO₂ Capture[J]. Journal of Petrochemical Universities, 2022, 35(4): 1-9.

图/表 6

参考文献 56

1	Friedlingstein P，O'sullivan M，Jones M W，et al.Global carbon budget 2020［J］. Earth System Science Data，2020，12（4）： 3269⁃3340.
2	蔡博峰，李琦，张贤，等.中国二氧化碳捕集利用与封存（CCUS）年度报告（2021）［R/OL］.（2021⁃08⁃02）［2022⁃06⁃01］.https：//xueqiu.com/9508834377/192832651.
3	Jones C W.CO₂ capture from dilute gases as a component of modern global carbon management［J］.Annual Review of Chemical and Biomolecular Engineering，2011，2：31⁃52.
4	Lackner K S.Capture of carbon dioxide from ambient air［J］.The European Physical Journal Special Topics，2009，176（1）：93⁃106.
5	Nikulshina V，Ayesa N，Gálvez M E，et al.Feasibility of Na⁃based thermochemical cycles for the capture of CO₂ from air⁃thermodynamic and thermogravimetric analyses［J］.Chemical Engineering Journal，2008，140（1⁃3）：62⁃70.
6	Barzagli F，Giorgi C，Mani F，et al.Screening study of different amine⁃based solutions as sorbents for direct CO₂ capture from air［J］.ACS Sustainable Chemistry & Engineering，2020，8（37）：14013⁃14021.
7	Zhao P，Zhang G，Yan H，et al.The latest development on amine functionalized solid adsorbents for post⁃combustion CO₂ capture：Analysis review［J］.Chinese Journal of Chemical Engineering，2021，35：17⁃43.
8	陈鸿伟，孙玮，张泽，等.MEA、DEA浸渍改性SBA⁃15对CO₂吸附性能的研究［J］.功能材料，2016，47（8）：8031⁃8034.
	Chen H W，Shun W，Zhang Z，et al.Investigation of the adsorption performance of CO₂ with MEA and DEA modified SBA⁃15 by impregnation method［J］.Journal of Functional Materials，2016，47（8）：8031⁃8034.
9	Wang J，Huang L，Yang R，et al.Recent advances in solid sorbents for CO₂ capture and new development trends［J］.Energy & Environmental Science，2014，7（11）：3478⁃3518.
10	Shen X，Yan F，Li C，et al.Biogas upgrading via cyclic CO₂ adsorption：Application of highly regenerable PEI@nano⁃Al₂O₃ adsorbents with anti⁃urea properties［J］.Environmental Science & Technology，2021，55（8）：5236⁃5247.
11	程意茹，张磊，蒲人娟，等.低温CO₂固体吸附剂的研究进展［J］.石油化工高等学校学报，2015，28（2）：91⁃96.
	Cheng Y R，Zhang L，Pu R J，et al.Research progress of low temperature carbon dioxide solid adsorbent［J］.Journal of Petrochemical Universities，2015，28（2）：91⁃96.
12	Gelles T，Lawson S，Rownaghi A A，et al.Recent advances in development of amine functionalized adsorbents for CO₂ capture［J］.Adsorption⁃Journal of the International Adsorption Society，2020，26（1）：5⁃50.
13	Li X，Wang Z，Liu Z，et al.A novel preparation of solid amine sorbents for enhancing CO₂ adsorption capacity using alumina⁃extracted waste［J］.Energy，2022，248：123677.
14	黄勇，谌伟庆，石秋杰，等.介孔分子筛SBA⁃15在催化领域的应用进展［J］.化工进展，2009，28（12）：2140⁃2145.
	Huang Y，Chen W Q，Shi Q J，et al.Application of mesoporous molecular sieves SBA⁃15 in catalysis［J］.Chemical Industry and Engineering Progress，2009，28（12）：2140⁃2145.
15	Park S J，Lee J J，Hoyt C B，et al.Silica supported poly（propylene guanidine） as a CO₂ sorbent in simulated flue gas and direct air capture［J］.Adsorption，2019，26（1）：89⁃101.
16	Sujan A R，Kumar D R，Sakwa⁃Novak M，et al.Poly（glycidyl amine）⁃loaded SBA⁃15 sorbents for CO₂ capture from dilute and ultradilute gas mixtures［J］.ACS Applied Polymer Materials，2019，1（11）：3137⁃3147.
17	Kumar D R，Rosu C，Sujan A R，et al.Alkyl⁃aryl amine⁃rich molecules for CO₂ removal via direct air capture［J］.ACS Sustainable Chemistry & Engineering，2020，8（29）：10971⁃10982.
18	He Z，Wang Y，Miao Y，et al.Mixed polyamines promotes CO₂ adsorption from air［J］.Journal of Environmental Chemical Engineering，2022，10（2）：107239.
19	Sakwa⁃Novak M A，Tan S，Jones C W.Role of additives in composite PEI/Oxide CO₂ adsorbents：Enhancement in the amine efficiency of supported PEI by PEG in CO₂ capture from simulated ambient air［J］.ACS Applied Materials & Interfaces，2015，7（44）：24748⁃24759.
20	Kuwahara Y，Kang D Y，Copeland J R，et al.Enhanced CO₂ adsorption over polymeric amines supported on heteroatom⁃incorporated SBA⁃15 silica：Impact of heteroatom type and loading on sorbent structure and adsorption performance［J］.Chemistry，2012，18（52）：16649⁃16664.
21	Kuwahara Y，Kang D Y，Copeland J R，et al.Dramatic enhancement of CO₂ uptake by poly（ethyleneimine） using zirconosilicate supports［J］.Journal of the American Chemical Society，2012，134（26）：10757⁃10760.
22	尹锋，秦玉才，于文宇，等.TiO₂⁃MCM⁃41的制备表征及选择性吸附脱硫研究［J］.石油化工高等学校学报，2014，27（6）：1⁃6.
	Yin F，Qin Y C，Yu W Y，et al.Preparation and characterization of TiO₂⁃MCM⁃41 and its performance on the desulfurization［J］.Journal of Petrochemical Universities，2014，27（6）：1⁃6.
23	Sayari A，Liu Q，Mishra P.Enhanced adsorption efficiency through materials design for direct air capture over supported polyethylenimine［J］.ChemSusChem，2016，9（19）：2796⁃2803.
24	Jeon H G，Choi S D，Jeon S K，et al.Application of mesoporous silica foam for immobilization of salen complexes in chiral intermediates synthesis［J］.Bulletin of the Korean Chemical Society，2015，36（5）：1396⁃1404.
25	Chen Y，Yuan H，Xia H，et al.The volume expansion effect of amine during CO₂ adsorption process：An experimental study combined with theoretical calculations［J］.Journal of Colloid and Interface Science，2020，572：190⁃197.
26	Chaikittisilp W，Khunsupat R，Chen T T，et al.Poly（allylamine）⁃mesoporous silica composite materials for CO₂ capture from simulated flue gas or ambient air［J］.Industrial & Engineering Chemistry Research，2011，50（24）：14203⁃14210.
27	Wijesiri R P，Knowles G P，Yeasmin H，et al.CO₂ capture from air using pelletized polyethylenimine impregnated MCF silica［J］.Industrial & Engineering Chemistry Research，2019，58（8）：3293⁃3303.
28	Choi S，Gray M L，Jones C W.Amine⁃tethered solid adsorbents coupling high adsorption capacity and regenerability for CO₂ capture from ambient air［J］.Chem.Sus.Chem.，2011，4（5）：628⁃635.
29	Goeppert A，Czaun M，May R B，et al.Carbon dioxide capture from the air using a polyamine based regenerable solid adsorbent［J］.Journal of the American Chemical Society，2011，133（50）：20164⁃20167.
30	Goeppert A，Zhang H，Czaun M，et al.Easily regenerable solid adsorbents based on polyamines for carbon dioxide capture from the air［J］.Chem.Sus.Chem.，2014，7（5）：1386⁃1397.
31	Sanz⁃Pérez E S，Arencibia A，Calleja G，et al.Tuning the textural properties of HMS mesoporous silica.Functionalization towards CO₂ adsorption［J］.Microporous and Mesoporous Materials，2018，260：235⁃244.
32	Qi L，Han Y，Bai G，et al.Role of brush⁃like additives in CO₂ adsorbents for the enhancement of amine efficiency［J］.Journal of Environmental Chemical Engineering，2021，9（6）：106709.
33	Guo M，Liang S，Liu J，et al.Epoxide⁃functionalization of grafted tetraethylenepentamine on the framework of an acrylate copolymer as a CO₂ sorbent with long cycle stability［J］.ACS Sustainable Chemistry & Engineering，2020，8（9）：3853⁃3864.
34	Belmabkhout Y，Serna⁃Guerrero R，Sayari A.Amine⁃bearing mesoporous silica for CO₂ removal from dry and humid air［J］.Chemical Engineering Science，2010，65（11）：3695⁃3698.
35	Yoo C J，Park S J，Jones C W.CO₂ adsorption and oxidative degradation of silica⁃supported branched and linear aminosilanes［J］.Industrial & Engineering Chemistry Research，2019，59（15）：7061⁃7071.
36	Lashaki M J，Sayari A.CO₂ capture using triamine⁃grafted SBA⁃15：The impact of the support pore structure［J］.Chemical Engineering Journal，2018，334：1260⁃1269.
37	Yang H，Zhu M，Li Y.Sol⁃gel research in China：A brief history and recent research trends in synthesis of sol⁃gel derived materials and their applications［J］.Journal of Sol⁃Gel Science and Technology，2022：1⁃16.
38	Ballinger B，Motuzas J，Smart S，et al.Catalysis of silica sol⁃gel reactions using a PdCl₂ precursor［J］.Journal of Sol⁃Gel Science and Technology，2020，95（2）：456⁃464.
39	Wurzbacher J A，Gebald C，Steinfeld A.Separation of CO₂ from air by temperature⁃vacuum swing adsorption using diamine⁃functionalized silica gel［J］.Energy & Environmental Science，2011，4（9）：3584⁃3592.
40	Anyanwu J T，Wang Y，Yang R T.Amine⁃grafted silica gels for CO₂ capture including direct air capture［J］.Industrial & Engineering Chemistry Research，2019，59（15）：7072⁃7079.
41	Anyanwu J T，Wang Y，Yang R T.CO₂ capture （including direct air capture） and natural gas desulfurization of amine⁃grafted hierarchical bimodal silica［J］.Chemical Engineering Journal，2022，427：131561.
42	Wang S，Qiu X，Chen Y，et al.Preparation and structure tuning of CO₂ adsorbent based on in⁃situ amine⁃functionalized hierarchical porous polymer［J］.Microporous and Mesoporous Materials，2022，330：111585.
43	Kong Y，Jiang G，Wu Y，et al.Amine hybrid aerogel for high⁃efficiency CO₂ capture：Effect of amine loading and CO₂ concentration［J］.Chemical Engineering Journal，2016，306：362⁃368.
44	Liu F Q，Wang L，Huang Z G，et al.Amine⁃tethered adsorbents based on three⁃dimensional macroporous silica for CO₂ capture from simulated flue gas and air［J］.ACS Applied Materials & Interfaces，2014，6（6）：4371⁃4381.
45	Girimonte R，Formisani B，Testa F.Adsorption of CO₂ on a confined fluidized bed of pelletized 13X zeolite［J］.Powder Technology，2017，311：9⁃17.
46	Lee J，Chuah C Y，Tan W S，et al.3D⁃printed monolithic porous adsorbents from a solution⁃processible，hypercrosslinkable，functionalizable polymer［J］.Chemical Engineering Journal，2022，427：130883.
47	Rezaei F，Sakwa⁃Novak M A，Bali S，et al.Shaping amine⁃based solid CO₂ adsorbents：Effects of pelletization pressure on the physical and chemical properties［J］.Microporous and Mesoporous Materials，2015，204：34⁃42.
48	Carvalho A P，Mestre A S，Pires J，et al.Granular activated carbons from powdered samples using clays as binders for the adsorption of organic vapours［J］.Microporous and Mesoporous Materials，2006，93（1⁃3）：226⁃231.
49	Minju N，Abhilash P，Nair B N，et al.Amine impregnated porous silica gel sorbents synthesized from water⁃glass precursors for CO₂ capturing［J］.Chemical Engineering Journal，2015，269：335⁃342.
50	Lestriez B，Bahri S，Sandu I，et al.On the binding mechanism of CMC in Si negative electrodes for Li⁃ion batteries［J］.Electrochemistry Communications，2007，9（12）：2801⁃2806.
51	Yoosuk B，Methakhup P，Prasassarakich P.Binary sorption of CO₂ and H₂S over polyamine modified fumed silica pellets in a double stage fixed⁃bed system［J］.Process Safety and Environmental Protection，2017，106：173⁃179.
52	Wadi B，Mahomed A，Bai Y，et al.Formulation，adsorption performance，and mechanical integrity of triamine grafted binder⁃based mesoporous silica pellets for CO₂ capture［J］.Powder Technology，2021，393：257⁃264.
53	Lombardi M，Naglieri V，Tulliani J M，et al.Gelcasting of dense and porous ceramics by using a natural gelatine［J］.Journal of Porous Materials，2009，16（4）：393⁃400.
54	Tao T，Li Y，Yang S，et al.Nano⁃montmorillonite⁃based porous material prepared by gel casting：Structure and adsorption properties［J］.Micro & Nano Letters，2018，13（3）：332⁃334.
55	Zhao Y，Zhou J，Fan L，et al.Indoor CO₂ control through mesoporous amine⁃functionalized silica monoliths［J］.Industrial & Engineering Chemistry Research，2019，58（42）：19465⁃19474.
56	Zhou C，Yu S，Ma K，et al.Amine⁃functionalized mesoporous monolithic adsorbents for post⁃combustion carbon dioxide capture［J］.Chemical Engineering Journal，2021，413：127675.

吸附剂	载体	胺	吸附剂类型	吸附容量/(mmol·g^-1)	循环稳定性	参考文献
SBA⁃PPG⁃50	SBA⁃15	PPG	Ⅰ类	0.62	4次循环后，容量下降56.25%	[15]
SBA⁃PEI⁃48	SBA⁃15	PEI⁃1800	Ⅰ类	1.09	4个循环后，容量下降16.00%	[15]
PGA/SBA⁃15	SBA⁃15	PGA	Ⅰ类	0.30	20次循环后，容量几乎不变	[16]
60% Ph⁃3⁃ED/SBA⁃15	SBA⁃15	Ph⁃3⁃ED	Ⅰ类	0.92	25次循环后，容量几乎不变	[17]
S/T4/D1	SBA⁃15	DEA＆TEPA	Ⅰ类	1.93	10次循环后，容量下降2.50%	[18]
SBA⁃15/PEI/PEG200⁃low	SBA⁃15	PEI⁃800	Ⅰ类	0.73	-	[19]
PEI⁃34.4/Al5⁃SBA⁃15	SBA⁃15	PEI⁃800	Ⅰ类	0.29	-	[20]
PEI⁃31.8/Ti4.3⁃SBA⁃15	SBA⁃15	PEI⁃800	Ⅰ类	0.64	4次循环后，容量下降5.00%	[20]
PEI⁃32.7/Ce0.4⁃SBA⁃15	SBA⁃15	PEI⁃800	Ⅰ类	0.68	-	[20]
PEI⁃34.7/Zr7⁃SBA⁃15	SBA⁃15	PEI⁃800	Ⅰ类	0.84	3次循环后，容量几乎不变	[21]
PEI/PME(40)	MCM⁃41	PEI⁃800	Ⅰ类	2.18	20次循环后，容量下降4.60%	[23]
PEI⁃MCF⁃46	MCF	PEI⁃800	Ⅰ类	1.74	-	[26]
PAA⁃MCF⁃41	MCF	PAA	Ⅰ类	0.86	3次循环后，容量几乎不变	[26]
PEI⁃MCF⁃80a	MCF	PEI	Ⅰ类	1.29	-	[27]
FS⁃PEI(800)⁃50	FS	PEI⁃800	Ⅰ类	2.43	-	[29]
HMS⁃10a⁃PEI (50)	HMS	PEI⁃800	Ⅰ类	1.79	4次循环后，容量几乎不变	[31]
MMSN⁃30/TEPA⁃50	MMSN	TEPA	Ⅰ类	3.68	6次循环后，容量几乎不变	[32]
TRI⁃PE⁃MCM⁃41	MCM⁃41	TRI⁃Silane	Ⅱ类	0.98	-	[34]
L⁃丙基⁃SBA⁃1.72	SBA⁃15	AEAPTMS	Ⅱ类	0.56	4次循环后，容量下降5.00%	[35]
TRI⁃SBA⁃15⁃130⁃0.4	SBA⁃15	TRI	Ⅱ类	1.51	12次循环后，容量几乎不变	[36]
SI⁃AEATPMS	硅胶	AEATPMS	Ⅱ类	0.21	40次循环后，容量几乎不变	[39]
W⁃AG⁃150A	硅胶	TRI⁃Silane	Ⅱ类	0.77	17次循环后，容量几乎不变	[40]
WG⁃HBS⁃0.6	HBS	TPD	Ⅱ类	1.04	10次循环后，容量几乎不变	[41]
AHTSA10	硅胶	APTES	Ⅲ类	1.64	15次循环后，容量几乎不变	[43]
MPS⁃LA⁃120	MPS	LA⁃120	Ⅲ类	2.65	-	[44]

吸附剂	载体	胺	吸附剂类型	吸附容量/(mmol·g^-1)	循环稳定性	参考文献
SBA⁃PPG⁃50	SBA⁃15	PPG	Ⅰ类	0.62	4次循环后，容量下降56.25%	[15]
SBA⁃PEI⁃48	SBA⁃15	PEI⁃1800	Ⅰ类	1.09	4个循环后，容量下降16.00%	[15]
PGA/SBA⁃15	SBA⁃15	PGA	Ⅰ类	0.30	20次循环后，容量几乎不变	[16]
60% Ph⁃3⁃ED/SBA⁃15	SBA⁃15	Ph⁃3⁃ED	Ⅰ类	0.92	25次循环后，容量几乎不变	[17]
S/T4/D1	SBA⁃15	DEA＆TEPA	Ⅰ类	1.93	10次循环后，容量下降2.50%	[18]
SBA⁃15/PEI/PEG200⁃low	SBA⁃15	PEI⁃800	Ⅰ类	0.73	-	[19]
PEI⁃34.4/Al5⁃SBA⁃15	SBA⁃15	PEI⁃800	Ⅰ类	0.29	-	[20]
PEI⁃31.8/Ti4.3⁃SBA⁃15	SBA⁃15	PEI⁃800	Ⅰ类	0.64	4次循环后，容量下降5.00%	[20]
PEI⁃32.7/Ce0.4⁃SBA⁃15	SBA⁃15	PEI⁃800	Ⅰ类	0.68	-	[20]
PEI⁃34.7/Zr7⁃SBA⁃15	SBA⁃15	PEI⁃800	Ⅰ类	0.84	3次循环后，容量几乎不变	[21]
PEI/PME(40)	MCM⁃41	PEI⁃800	Ⅰ类	2.18	20次循环后，容量下降4.60%	[23]
PEI⁃MCF⁃46	MCF	PEI⁃800	Ⅰ类	1.74	-	[26]
PAA⁃MCF⁃41	MCF	PAA	Ⅰ类	0.86	3次循环后，容量几乎不变	[26]
PEI⁃MCF⁃80a	MCF	PEI	Ⅰ类	1.29	-	[27]
FS⁃PEI(800)⁃50	FS	PEI⁃800	Ⅰ类	2.43	-	[29]
HMS⁃10a⁃PEI (50)	HMS	PEI⁃800	Ⅰ类	1.79	4次循环后，容量几乎不变	[31]
MMSN⁃30/TEPA⁃50	MMSN	TEPA	Ⅰ类	3.68	6次循环后，容量几乎不变	[32]
TRI⁃PE⁃MCM⁃41	MCM⁃41	TRI⁃Silane	Ⅱ类	0.98	-	[34]
L⁃丙基⁃SBA⁃1.72	SBA⁃15	AEAPTMS	Ⅱ类	0.56	4次循环后，容量下降5.00%	[35]
TRI⁃SBA⁃15⁃130⁃0.4	SBA⁃15	TRI	Ⅱ类	1.51	12次循环后，容量几乎不变	[36]
SI⁃AEATPMS	硅胶	AEATPMS	Ⅱ类	0.21	40次循环后，容量几乎不变	[39]
W⁃AG⁃150A	硅胶	TRI⁃Silane	Ⅱ类	0.77	17次循环后，容量几乎不变	[40]
WG⁃HBS⁃0.6	HBS	TPD	Ⅱ类	1.04	10次循环后，容量几乎不变	[41]
AHTSA10	硅胶	APTES	Ⅲ类	1.64	15次循环后，容量几乎不变	[43]
MPS⁃LA⁃120	MPS	LA⁃120	Ⅲ类	2.65	-	[44]

[1]	李敏, 李政, 顾贵洲, 于喜洋, 王辉. Zn⁃Mg⁃Al LDO的制备及其除氟性能研究[J]. 石油化工高等学校学报, 2023, 36(5): 73-80.
[2]	刘嘉敏, 越婷婷, 常迎, 郭少红, 贾晶春, 贾美林. CO₂RR稀土基催化剂的研究进展[J]. 石油化工高等学校学报, 2023, 36(4): 1-12.
[3]	寇海群, 朱洲, 周瑜昌, 兰新典, 余美莹, 陈浩南. 两亲性壳聚糖负载膨润土降焦化废水COD的研究[J]. 石油化工高等学校学报, 2023, 36(3): 52-59.
[4]	曹蕊, 韩冬云, 曹祖斌. 含油污泥的固化与成型机理研究[J]. 石油化工高等学校学报, 2022, 35(2): 9-14.
[5]	李双林，魏民，王海彦. S⁃Zorb反应吸附脱硫技术的研究进展[J]. 石油化工高等学校学报, 2020, 33(6): 19-25.
[6]	石斌, 成文文, 李志祥. N a BH₄低温还原的负载型镍基催化剂苯酚加氢的研究[J]. 石油化工高等学校学报, 2015, 28(4): 1-6.
[7]	程意茹, 张磊, 蒲人娟, . 低温CO₂ 固体吸附剂的研究进展[J]. 石油化工高等学校学报, 2015, 28(2): 91-96.
[8]	阮艳军,秦波, 秦玉才. C u Y / B e t a对燃料油吸附脱硫性能的研究[J]. 石油化工高等学校学报, 2013, 26(6): 26-30.
[9]	甄晓波,王鼎聪,丁巍,赵德智,曹祖宾. 纳米自组装催化剂对催化裂化混合油抗结焦性能的研究[J]. 石油化工高等学校学报, 2013, 26(1): 11-16.
[10]	王焕,轩丽伟,张吉庆,王海彦. 含钛复合载体的制备与表征[J]. 石油化工高等学校学报, 2012, 25(5): 22-24.
[11]	刘永善,张志伟,刘兴辉,闫鸣宇. 镍催化剂对加氢石油树脂性质的影响[J]. 石油化工高等学校学报, 2012, 25(4): 18-20.
[12]	刘岩,商丽艳,李艳,翟玉春. 纳米氧化铝载体的制备及孔性质研究[J]. 石油化工高等学校学报, 2010, 23(2): 13-15.
[13]	余海清, 李建伟, 孙晓岩, 李英霞, 陈标华. 胶溶剂对MCM-22分子筛催化剂性能的影响[J]. 石油化工高等学校学报, 2009, 22(1): 1-4.
[14]	王继元,顾越峰,陈韶辉. 胶溶剂对TiO2成型载体性能的影响[J]. 石油化工高等学校学报, 2009, 22(1): 26-30.
[15]	周灿丰, 焦向东, 薛龙, 陈家庆, 王中辉, 吕涛, 房晓明. 高压空气环境钨极氩弧焊接电弧静特性[J]. 石油化工高等学校学报, 2008, 21(1): 66-69.

硅基固体胺吸附剂捕集空气中CO₂的研究进展

Research Progress in Silicon⁃Based Solid Amine Adsorbents for CO₂ Capture

HTML

PDF

可视化

摘要/Abstract

引用本文

使用本文

图/表 6

参考文献 56

相关文章 15

编辑推荐

Metrics