石油化工高等学校学报

石油化工高等学校学报 ›› 2017, Vol. 30 ›› Issue (5): 55-59.DOI: 10.3969/j.issn.1006-396X.2017.05.011

• 石油工程 • 上一篇    下一篇

一种计算油井井底流压的新方法

叶雨晨1,杨二龙1,齐 梦1,隋殿雪2   

  • 收稿日期:2017-02-20 修回日期:2017-03-27 出版日期:2017-10-31 发布日期:2017-11-10
  • 作者简介:叶雨晨(1993-),女,硕士研究生,从事油气田开发方面研究;E-mail:yeyuchen610@163.com
  • 基金资助:
    黑龙江省科学基金资助项目(E2016008)

A New Method for Calculation of BottomHole Pressure in Pumping Well

  1. (1. Institute of Petroleum Engineering,Northeast Petroleum University,Daqing Heilongjiang 163318,China; [JP3]2. The Fourth Oil Extraction Plant, Daqing Oilfield Company Limited Oil Extraction Plant,Daqing Heilongjiang 163318,China)
  • Received:2017-02-20 Revised:2017-03-27 Published:2017-10-31 Online:2017-11-10

摘要: 油井的井底流压是影响油田的生产能力和油田调整方案的重要参数之一,也是进行油气井动态分析的基础,直接控制井的生产能力。但实际应用中由于地层条件的复杂性,现在并没有一个系统的方法能十分准确的计算出井底流压。在液面折算法计算井底流压的基础上,将油套环形空间中流体分为气柱段、油气段、油气水段三种不同流动形态,研究不同流动形态下混合液密度与压降梯度的关系,采用分段计算模式,应用微积分方法计算油井的井底压力。现场试验结果表明,该方法计算的抽油井井底压力与压力计实测压力值平均相对误差为8.54%,可以满足现场实际需求。

关键词: 抽油井,    ,  流压,    , 混合液密度,    , 程序设计

Abstract: Bottomhole pressure is one of the important parameters that affect oil production capacity and the adjustment scheme of oil field. It is also the basis of dynamic analysis of oil and gas wells, and the production capacity of the well is controlled directly. However, due to the complexity of the formation conditions, there is not a systematic method to calculate the bottom hole flow pressure. Based on level conversion method, the fluid in the annular space of an oil sleeve is divided into three different flow patterns of gas column, oil and gas and oil gas water. The field test results show that the average relative error between the measured pressure value and the measured pressure value of the pumping well bottom hole pressure of the pressure gauge is 8.54%, which can meet the actual needs of the field.

Key words: Pumping well,   , Flow pressure,   ,  Mixed liquid density,   ,  Program design

引用本文

叶雨晨,杨二龙,齐 梦,隋殿雪. 一种计算油井井底流压的新方法[J]. 石油化工高等学校学报, 2017, 30(5): 55-59.

Ye Yuchen,Yang Erlong,Qi Meng,Sui Dianxue. A New Method for Calculation of BottomHole Pressure in Pumping Well[J]. Journal of Petrochemical Universities, 2017, 30(5): 55-59.

使用本文