辽宁石油化工大学学报

辽宁石油化工大学学报 ›› 2016, Vol. 36 ›› Issue (4): 1-4.DOI: 10.3969/j.issn.1672-6952.2016.04.001

• •    下一篇

多氨基多醚基甲叉膦酸土柱淋洗修复镉污染土壤

刘艺芸,张连红,崔 爽,孙秀菊   

  1. (辽宁石油化工大学化学化工与环境学部,辽宁抚顺113001)
  • 收稿日期:2016-05-24 修回日期:2016-06-23 出版日期:2016-07-20 发布日期:2016-08-24
  • 通讯作者: 张连红(1970-),男,博士,教授,从事环境化工方面的研究;E-mail:zlhlhy@163.com。
  • 作者简介:刘艺芸(1990-),女,硕士研究生,从事污染土壤修复的研究;E-mail:1198084287@qq.com
  • 基金资助:
    国家自然科学基金资助项目“PAPEMP螯合强化植物修复Cd污染土壤及其环境风险研究”(31100375)

Remediation of Cd-Contaminated Soil Using PAPEMPby Soil Column Leaching Method

Liu Yiyun, Zhang Lianhong, Cui Shuang, Sun Xiuju   

  1. College of Chemistry, Chemical Engineering and Environmental Engineering, Liaoning Shihua University, Fushun Liaoning 113001, China

  • Received:2016-05-24 Revised:2016-06-23 Published:2016-07-20 Online:2016-08-24

摘要: 采用土柱淋洗的方法,研究有机膦酸PAPEMP淋洗去除重金属镉的适宜条件,分别研究了PAPEMP不同土液比、淋洗时间和淋洗次数对土壤中重金属镉的去除效果。结果表明,以质量分数为7%PAPEMP溶液为淋洗剂,土液比为1∶4,淋洗时间为240min的条件下,1次淋洗时土壤中镉的去除率最高。PAPEMP可以应用于淋洗修复镉污染土壤。

关键词: 多氨基多醚基甲叉膦酸, 土柱淋洗, 镉污染土壤

Abstract: Using soil column leaching method, the best leaching conditions have been studied with the organic phosphonic acid PAPEMP, including different ratio of soil to solution, leaching time and leaching frequency on the Cd removal rate, respectively. The research results showedwhen the quality percentage of PAPEMP was 7%, the ratio of soil to solution of 1∶4, the leaching time of 240 min and leaching once, the removal rate of Cd was the highest. PAPEMP can be used in leaching remediation of Cd contaminated soils.

Key words: PAPEMP, Soil column leaching, Cd-contaminated soil

引用本文

刘艺芸, 张连红, 崔 爽, 孙秀菊. 多氨基多醚基甲叉膦酸土柱淋洗修复镉污染土壤[J]. 辽宁石油化工大学学报, 2016, 36(4): 1-4.

Liu Yiyun, Zhang Lianhong, Cui Shuang, Sun Xiuju.

Remediation of Cd-Contaminated Soil Using PAPEMPby Soil Column Leaching Method[J]. Journal of Liaoning Petrochemical University, 2016, 36(4): 1-4.

使用本文

0
    /   /   推荐

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://journal.lnpu.edu.cn/CN/10.3969/j.issn.1672-6952.2016.04.001

               http://journal.lnpu.edu.cn/CN/Y2016/V36/I4/1