辽宁石油化工大学学报

辽宁石油化工大学学报 ›› 2016, Vol. 36 ›› Issue (2): 45-48.DOI: 10.3696/j.issn.1672-6952.2016.02.012

• 化工机械 • 上一篇    下一篇

可移动罐柜的有限元分析

王 强,王庆国   

  1. (中航黎明锦西化工机械(集团)有限责任公司,辽宁葫芦岛125001)
  • 收稿日期:2015-08-07 修回日期:2015-10-25 出版日期:2016-04-25 发布日期:2016-05-06
  • 作者简介:王强(1977-),男,硕士,工程师,从事压力容器的设计及工艺等方面的研究;E-mail:wyf20080318@163.com

The Finite Analysis of Portable Tank

Wang Qiang Wang Qingguo   

  1. AVIC Liming Jinxi Chemical Machinery(Group) Co.,Ltd.,Huludao Liaoning 125001,China
  • Received:2015-08-07 Revised:2015-10-25 Published:2016-04-25 Online:2016-05-06

摘要: 以T21型三乙基铝储罐为例,介绍了可移动罐柜的整体有限元分析过程。分别以壳单元与实体单元
为对象建立有限元分析模型,进行了有限元分析计算,并对支座的结构进行了优化设计。通过分析得知,可移动罐
柜受运动方向的惯性力时,鞍座结构优化前后应力变化较大,优化前的鞍座最大应力为38.89MPa,优化后的鞍座最
大应力为130.58MPa

关键词: 可移动罐柜, 壳单元, 实体单元, 三乙基铝, 有限元分析

Abstract: aking example for T21 Aluminumtriethide tank, introducing the whole finite analysis process of  portable tank, a finite model for thin shell element and solid element was established, and has been taken into account. The optimal structure designing of vessel supports was accomplished, the analysis results indicated the portable tank by the motion direction of the inertial force and saddle structure before and after optimization should force changes in the larger, saddle before optimization of the maximum stress was 38.89 MPa, saddle after optimization of the maximum stress was 130.58 MPa.

Key words: Portable tank, Shell element, Solid element, Aluminumtriethide, Finite element analysis

引用本文

王 强,王庆国. 可移动罐柜的有限元分析[J]. 辽宁石油化工大学学报, 2016, 36(2): 45-48.

Wang Qiang, Wang Qingguo.

The Finite Analysis of Portable Tank[J]. Journal of Liaoning Petrochemical University, 2016, 36(2): 45-48.

使用本文

0
    /   /   推荐

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://journal.lnpu.edu.cn/CN/10.3696/j.issn.1672-6952.2016.02.012

               http://journal.lnpu.edu.cn/CN/Y2016/V36/I2/45