辽宁石油化工大学学报

辽宁石油化工大学学报 ›› 2018, Vol. 38 ›› Issue (03): 79-83.DOI: 10.3969/j.issn.1672-6952.2018.03.015

• 机械工程 • 上一篇    下一篇

膨胀干燥机橡胶熔体流动数值模拟分析

吴显威1邓子龙1郭玉泉1罗琳2   

  1. (1.辽宁石油化工大学 机械工程学院,辽宁 抚顺113001;2.中国石油审计服务中心,北京100028)
  • 收稿日期:2017-05-04 修回日期:2017-06-25 出版日期:2018-06-25 发布日期:2018-07-11
  • 通讯作者: 邓子龙(1967-),男,硕士,教授,从事机电液一体化、机械现代设计与理论方面的研究;E-mail:331643737@qq.com
  • 作者简介:(吴显威(1992-),女,硕士研究生,从事流体机械内部流动及性能研究;E-mail:1426399580@qq.com

Analysis of the Flow Rule of Rubber Melts in the Expansion Dryer

Wu Xianwei1Deng Zilong1Guo Yuquan1Luo Lin2   

  1. (1.School of Mechanical Engineering,Liaoning Shihua University,Fushun Liaoning 113001,China;  2.China Petroleum and Audit Service Center,Beijing 100028,China)
  • Received:2017-05-04 Revised:2017-06-25 Published:2018-06-25 Online:2018-07-11

摘要: 膨胀干燥机是橡胶后处理的重要设备,通过膨胀干燥机可脱去橡胶熔体中90%的水分。基于FLUENT软件,对橡胶熔体在膨胀干燥机流道中的流动进行数值分析,并根据速度分布云图及压力分布云图,分析橡胶熔体在流道中的流动规律。研究结果可为进一步研究工艺参数对橡胶质量的影响奠定基础。

关键词: 膨胀干燥机, FLUENT, 橡胶熔体, 流动规律

Abstract: The expansion dryer was the critical equipment for the finishing unit of rubber plant. It could take off 90% moisture in the rubber melt. The flow behavior of rubber melts in the channel of the expansion dryer was analyzed by FLUENT. Observing the nephogram of the distribution of rubber melts speeds and stress nephogram, the flow rule of rubber melts in the expansion dryer was analyzed. The following research directions were indicated.

Key words: The expansion dryer, FLUENT, Rubber melts, The flow rule

引用本文

吴显威,邓子龙,郭玉泉,罗琳. 膨胀干燥机橡胶熔体流动数值模拟分析[J]. 辽宁石油化工大学学报, 2018, 38(03): 79-83.

Wu Xianwei,Deng Zilong,Guo Yuquan,Luo Lin. Analysis of the Flow Rule of Rubber Melts in the Expansion Dryer[J]. Journal of Liaoning Petrochemical University, 2018, 38(03): 79-83.

使用本文

0
    /   /   推荐

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://journal.lnpu.edu.cn/CN/10.3969/j.issn.1672-6952.2018.03.015

               http://journal.lnpu.edu.cn/CN/Y2018/V38/I03/79