辽宁石油化工大学学报

辽宁石油化工大学学报 ›› 2014, Vol. 34 ›› Issue (5): 36-38,43.DOI: 10.3696/j.issn.1672-6952.2014.05.010

• 石油储运 • 上一篇    下一篇

导热油管道的压力计算

王国维,王盛智,王为民   

  1. ( 辽宁石油化工大学石油天然气工程学院, 辽宁抚顺1 1 3 0 0 1)
  • 收稿日期:2013-11-27 出版日期:2014-10-25 发布日期:2017-07-14
  • 通讯作者: 王盛智( 1 9 6 3 - ) , 女, 副教授, 从事管道强度的研究; E - m a i l : 1 5 2 4 1 3 2 9 5 4 9@1 6 3. c o m。
  • 作者简介:王国维( 1 9 8 4 - ) , 男, 硕士研究生, 从事管道强度的研究; E - m a i l : w a n g g u o w e i 1 1 0 4@1 2 6. c o m

Heat Transfer Oil Pipeline Pressure Calculation

Wang GuoweiWang ShengzhiWang Weimin   

  1. (College of Petroleum Engineering,Liaoning Shihua University,Fushun Liaoning 113001,China)
  • Received:2013-11-27 Published:2014-10-25 Online:2017-07-14

摘要: 针对生产的实际需要, 为保证用于沥青罐加热的导热油能顺利返回到导热油锅炉, 一般采用适当提升导热油压力的方法。对整个管路的压降进行了计算, 并对管道的沿程摩阻和局部摩阻进行了详细讨论和计算, 得出了管线沿程的总压降。通过相关数据计算了导热油的流量, 提出了用于压力提升的离心泵的选择方案。

关键词:  导热油, 管道, 压, 摩阻, 离心泵

Abstract: According to the actual production, in order to guarantee asphalt tank heating of the heat transfer oil could smooth return to the heat transfer oil boiler and generally appropriated heat conduction oil pressure. For the whole pipeline pressure drop was calculated, and the friction of pipe and partial friction had carried on the detailed discussion and calculation, and the total pressure dropped along the pipeline. Through the relevant data to calculate the flow rate of heat conduction oil, the pressure centrifugal pump selection scheme of ascension was selected.

Key words: Heat transfer oil, Pipeline, Pressure drop, Friction, Centrifugal pumps

引用本文

王国维,王盛智,王为民. 导热油管道的压力计算[J]. 辽宁石油化工大学学报, 2014, 34(5): 36-38,43.

Wang Guowei, Wang Shengzhi, Wang Weimin. Heat Transfer Oil Pipeline Pressure Calculation[J]. Journal of Liaoning Petrochemical University, 2014, 34(5): 36-38,43.

使用本文

0
    /   /   推荐

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://journal.lnpu.edu.cn/CN/10.3696/j.issn.1672-6952.2014.05.010

               http://journal.lnpu.edu.cn/CN/Y2014/V34/I5/36